Hostname: page-component-745bb68f8f-b6zl4 Total loading time: 0 Render date: 2025-01-15T00:29:56.114Z Has data issue: false hasContentIssue false
  • English
  • Français

Graded Porous Silicon Carbide for High Temperature Membrane Applications

Published online by Cambridge University Press:  21 February 2012

Jyothi Suri  and
Leon L. Shaw
Jyothi Suri
Affiliation:
Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut 06269, USA
Leon L. Shaw
Affiliation:
Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut 06269, USA
Get access

Abstract

Due to its excellent thermal shock resistance, mechanical and chemical stability at both room and elevated temperatures, silicon carbide (SiC) is an attractive material for environmental protection and energy production applications such as catalyst supports, molten metal filters and gas separation membranes. Precise pore size control and high porosity are the key deciding factors for such applications. In this study, we demonstrated the fabrication of bi-layered SiC membranes with a graded porosity, consisting of porous nano-SiC layer on the surface of a porous coarse-grained SiC support layer. Nano-SiC powders utilized for this study were synthesized using a novel process based on mechanical activation of silica fume and graphite mixtures, resulting in particle sizes as small as 30 nm. The effects of sintering temperature were investigated to control the pore size, particle size and overall density of the bi-layered membrane.

Keywords

powder processingdensificationsintering
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1386: Symposium D – Sustainable Synthesis of Nanomaterials , 2012 , mrsf11-1386-d09-29
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Takeda, Y., Nakamura, K., Maeda, K., and Matsushita, Y., J. Am. Ceram. Soc. 70, C266 (1987).Google Scholar
2. Schulz, K., and Durst, M., Filtration & Separation 31, 25 (1994).Google Scholar
3. Rosenbloom, A.J., Sipe, D.M., Shishkin, Y., Ke, Y., Devaty, R.P., and Choyke, W.J., Biomedical Microdevices 6, 261 (2004).Google Scholar
4. Li, Z.Y., Kusakabe, K., and Morooka, S., J. Membr. Sci. 118, 159 (1996).Google Scholar
5. Kenawy, S.H., and Nour, W.M.N., J. Mater. Sci. 40, 3789 (2005).Google Scholar
6. Yoshino, Y., Suzuki, T., Nair, B.N., Taguchi, H., and Itoh, N., J. Membr. Sci., 267, 8 (2005).Google Scholar
7. Kojima, R., Sato, K., Nagaono, T. and Iwamoto, Y., J. Ceram. Soc. Japan, 114, 929 (2006).Google Scholar
8. Suri, J., Shaw, L.L., and Zawrah, M.F., Intl J. Applied Ceram. Tech. doi: 10.1111/j.1744–7402.2011.00710.x Google Scholar
9. Suri, J., Shaw, L.L., and Zawrah, M.F., Ceram. Int. 37, 3477 (2011).Google Scholar
10. Mulla, M.A. and Krstic, V.D., J.Mater.Sci. 29, 934 (1994).Google Scholar