Hostname: page-component-6bf8c574d5-mggfc Total loading time: 0 Render date: 2025-02-22T17:11:25.717Z Has data issue: false hasContentIssue false
  • English
  • Français

Hot Carrier Effects in Deep Submicron Nmosfets

Published online by Cambridge University Press:  15 February 2011

Abhijit Phanse  and
Samar Saha
Abhijit Phanse
Affiliation:
National Semiconductor Corporation, Santa Clara, CA 95052, phanse@lan.nsc.com
Samar Saha
Affiliation:
Silicon Systems Inc., Santa Cruz, CA 95060, saha@scz.ssil.com
Get access

Abstract

This paper addresses hot-carrier related reliability issues in deep submicron silicon nMOSFET devices. In order to monitor the hot-carrier induced device degradation, the substrate current was measured for devices with varying channel lengths (20 um - 0.24 um) under various biasing conditions. Deep submicron devices experience velocity saturation of channel carriers due to extremely high lateral electric fields. To evaluate the effects of velocity saturation in the channel, the pinch-off length in the channel was extracted for all the devices of the target technology. It was observed that for very short channel devices, carriers in most of the channel experience velocity saturation and almost the entire channel gets pinched off. It is shown in this paper that for very short channel devices, the pinch-off length in the channel is limited by the effective channel length, and that velocity saturation effects are critical to the transport of channel carriers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 428: Symposium L – Materials Reliability in Microelectronics VI , 1996 , 385
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Saha, S., Yeh, C. S., and Gadepally, B., Solid State Electronics 36, 1429 (1993).Google Scholar
[2] Saha, S., Solid State Electronics 37, 1786 (1994).Google Scholar
[3] Hu, C., Tam, S. C., Hsu, F. C., Ko, P. K., Chan, T. Y., and Terrill, K. W., IEEE Transactions Electron Devices ED 32, 375, (1985).Google Scholar
[4] Chan, T. Y, Ko, P. K., and Hu, C., IEEE Electron Device Lett. EDL–5, 505 (1984).Google Scholar
[5] El-Mansy, Y. A. and Boothroyd, A. R., IEEE Trans. Electron Devices ED–24, 254 (1977).Google Scholar
[6] Ko, P. K., Muller, R. S. and Hu, C., IEDM Proc., 600 (1981).Google Scholar
[7] Ng, K. K. and Brews, J. R., IEEE Circuits and Devices, 33 (1990).Google Scholar
[8] Chern, J. G. J., Chang, P., Motta, R. F., and Godinho, N., IEEE Electron Device Lett. EDL–1, 170 (1980).Google Scholar
[9] PRESTO - Parameter Extraction and Simulation Tool, National Semiconductor Corporation, 1995.Google Scholar
[10] Ono, M., Saito, M., Yoshitomi, T., Fiegna, C., Ohguro, T., and Iwai, H., IEEE Trans. of Electron Devices ED–42, 1822 (1995).Google Scholar