No CrossRef data available.
Article contents
Novel Chain Stack Capacitor for 32Mb FeRAM and Beyond
Published online by Cambridge University Press: 11 February 2011
Abstract
For high density FeRAM devices small cell sizes are essential. The combination of the capacitor on plug (COP) structure with the Chain FeRAM™ cell design is used to develop a 32Mb FeRAM. Based on a 0.2 μm standard CMOS process a silicide capped polysilicon plug is used to contact the bottom electrode of the ferroelectric capacitor to the transistor. The barrier contact to the plug is formed by IrO2/Ir and a sputter deposited PZT (40/60) is used as ferroelectric material. The function of SrRuO3 (SRO) layers at the electrode/PZT interfaces is described in more detail. Double sided SRO results in slightly lower coercive voltage and imprint behavior compared to capacitors without SRO. Double sided SRO is essential to achieve excellent fatigue behavior measured up to 1×1011 switching cycles.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2003