Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-10T06:56:27.046Z Has data issue: false hasContentIssue false

Optical Processing Devices for Optical Communications: Multilayered a-SiC:H Architectures

Published online by Cambridge University Press:  31 January 2011

Paula Louro
Affiliation:
plouro@deetc.isel.ipl.pt, ISEL, DEETC, Lisbon, Portugal
Manuela Vieira
Affiliation:
mv@isel.ipl.pt, ISEL, DEETC, R. Conselheiro Emídio Navarro, Lisbon, 1954-114, Portugal
M. A. Vieira
Affiliation:
mvieira@deetc.isel.ipl.pt, ISEL, DEETC, Lisbon, Portugal
Miguel Fernandes
Affiliation:
mfernandes@deetc.isel.ipl.pt, ISEL, DEETC, Lisbon, Portugal
Alessandro Fantoni
Affiliation:
afantoni@deetc.isel.ipl.pt, ISEL, DEETC, Lisbon, Portugal
G. Lavareda
Affiliation:
pcanc@ist.utl.pt, Uninova, CTS, Lisbon, Portugal
C. N. Carvalho
Affiliation:
canc@ist.utl.pt, IST, ICEMS, Lisbon, United States
Get access

Abstract

In this paper three multilayered architectures based on a-SiC:H with voltage controlled spectral selectivity in the visible spectrum range are analyzed. Multiple simultaneous modulated communication channels (red, green and blue or their polychromatic mixtures) were transmitted together at different frequencies. The combined optical signal was analyzed by reading out the photocurrent signal generated by the devices, under different applied voltages. Results show that the multiplexed signal depends on the device architecture and is balanced by the wavelength and transmission speed of each input channel, keeping the memory of the incoming optical carriers. In the single graded p-i’i-n configuration the device acts mainly as an optical switch while in two stacked p-i’-n-(ITO)-p-i-n configurations, the input channels are selectively tuned by shifting between forward and reverse bias. An electrical model, supported by a numerical simulation gives insight into the device operation.

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Bas, Michael, Fiber Optics Handbook, Fiber, Devices and Systems for Optical Communication, Chap, 13, McGraw-Hill, Inc. 2002.Google Scholar
2 Randel, S. Koonen, A.M.J. Lee, S.C.J. Breyer, F. Larrode, M. Garcia, Yang, J. Ng'Oma, A., Rijckenberg, G.J, Boom, H.P.A.. “Advanced modulation techniques for polymer optical fiber transmission”. proc. ECOC 07 (Th 4.1.4). Berlin, Germany (2007) 14.Google Scholar
3 Louro, P. Vieira, M. Vieira, M A, Fernandes, M. Fantoni, A. Francisco, C. Barata, M.Optical multiplexer for short range application”, Physica E 41 (2009) 10821085.Google Scholar
4 Ziemann, O. Krauser, J. Zamzow, P.E. Daum, W. POF Handbook, “Optical Short Range Transmission Systems”, Springer, 2nd Ed., 2008.Google Scholar
5 Rugh, Wilson J.Linear System Theory” (2nd Edition) Prentice-Hall Information and Systems Science Series, Serie E (1995).Google Scholar
6 Vieira, M. Fantoni, A. Fernandes, M. Louro, P. lavareda, G. Carvalho, C. N. “pinpìn and pinpii'n multilayer devices with voltage controlled optical readout” Journal of Nanoscience and Nanotechnology, Vol 9, In Press, Corrected Prof, Available online, February 2009.Google Scholar