Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-10T10:00:11.860Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulsed-Laser Deposition of Biaxially Textured YSZ/CeO2 Films on Electrodeposited Ir/Ni-W Tapes for YBCO Superconductors

Published online by Cambridge University Press:  01 February 2011

Tapas Chaudhuri ,
Priscila Spagnol ,
Raghu Bhattacharya  and
Sovannary Phok
Tapas Chaudhuri
Affiliation:
National Renewable Energy Laboratory, Superconductivity Group, 1617 Cole Blvd., Golden, CO 80401, USA
Priscila Spagnol
Affiliation:
National Renewable Energy Laboratory, Superconductivity Group, 1617 Cole Blvd., Golden, CO 80401, USA
Raghu Bhattacharya
Affiliation:
National Renewable Energy Laboratory, Superconductivity Group, 1617 Cole Blvd., Golden, CO 80401, USA
Sovannary Phok
Affiliation:
National Renewable Energy Laboratory, Superconductivity Group, 1617 Cole Blvd., Golden, CO 80401, USA
Get access

Abstract

Iridium film is a potential candidate as a buffer layer for yttrium barium copper oxide (YBCO) coated conductors. Pulsed laser deposition (PLD) of biaxially textured CeO2/yttrium stabilized zirconium oxide (YSZ) layers on electrodeposited Ir/Ni-W is reported. Biaxial texturing is obtained by deposition of a YSZ seed layer at 800°C in 10-6 Torr vacuum. X-ray diffraction (XRD) studies of Θ-2Θ and pole figure confirmed in-plane out-of-plane biaxial texturing with Δφ = 6.5° and Δω = 8°. Atomic force microscopy (AFM) revealed a surface with roughness of about 3 nm.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 868: Symposium C – Recent Advances in Superconductivity - Materials Synthesis, Multiscale Characterization and Functionally Layered Composite Conductors , 2005 , C6.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Goyal, A., Paranthaman, M.P., and Scoop, U., MRS Bull. 29, 552 (2004)Google Scholar
2 Norton, D. P., Mater. Sci. Engg. R 43, 134 (2004)Google Scholar
3 Bhattacharya, R. N., Chen, J., Spagnol, P., and Chaudhuri, T., Electrochem. Solid State Lett. 7 D22 (2004)Google Scholar
4 Aytug, T., Parntham, M., Zhai, H.Y., Gapud, A.A., Leonard, K.J., Martin, P.M., Goyal, A., Thompson, J.R., and Christen, D.K., Appl. Phys. Lett. 85, 2887 (2004).Google Scholar
5 Spagnol, P., Chaudhuri, T., Bhattacharya, R. and Phok, S., (this conference) (2005)Google Scholar
6 Chen, J., Spagnol, P., Bhattacharya, R.N., and Ren, Z., J. Phys. D: Appl. Phys. 37, 2623 (2004).Google Scholar