Hostname: page-component-6bf8c574d5-gr6zb Total loading time: 0 Render date: 2025-02-22T16:43:04.328Z Has data issue: false hasContentIssue false
  • English
  • Français

Recrystallization Behavior of Ni3 AI(B)

Published online by Cambridge University Press:  26 February 2011

G. Gottstein  and
W. Kim
G. Gottstein
Affiliation:
Department of Metallurgy, Mechanics and Materials Science Michigan State University East Lansing, MI 48824
W. Kim
Affiliation:
Department of Metallurgy, Mechanics and Materials Science Michigan State University East Lansing, MI 48824
Get access

Abstract

The recrystallization kinetics, structure development, stored energy of cold work, and rolling and recrystallization textures were studied on boron doped Ni76Al24. The recrystallization kinetics were very slow compared to pure metals or disordered solid solutions, but similar to other intermetallic compounds. The development of the deformed and recrystallized microstructure is similar to metals with intermediate stacking fault energy. Despite a lack of massive deformation twinning the rolling texture is a typical brass type texture. The recrystallization texture is not a brass type recrystallization texture, but consists of components, which are related by a 25°<100> rotation among each other and with the deformation texture. The observed phenomena are attributed to the constraints of grain boundary motion in long range ordered structures. It is further shown that Ni3Al does undergo dynamic recrystallization during high temperature deformation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 133: Symposium H – High-Temperature Ordered Intermetallic Alloys III , 1988 , 511
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Baker, I., Viens, D.V., and Schulson, E.M.; J. Mat. Sci. 19, 1799 (1984).Google Scholar
[2] Haff, G.R. and Schulson, E.M.; Met. Trans. 13A, 1563 (1982).Google Scholar
[3] Tagasugi, T. and Izumi;, O. Acta Metall. 33, 49 (1985).Google Scholar
[4] Rosenbaum, F.W.; Doctoral Dissertation, RWTH Aachen (1971).Google Scholar
[5] Avrami, M.; J. Chem. Phys. 7, 1103 (1939).CrossRefGoogle Scholar
[6] Yoo, M.H.; Acta Metall. 35, 1559 (1987).Google Scholar
[7] Hirsch, J.; Doctoral Dissertation, RWTH Aachen (1984).Google Scholar
[8] Doherty, R.D. et al.; in ICOTOM8, ed. Kallend, J.S. and Gottstein, G., (TMS, Warrendale, PA, 1988), p. 563.Google Scholar
[9] Li.cke, K., Rixen, R. and Rosenbaum, F.W.; in The Nature and Behavior of Grain Boundaries, ed. Hu, H., (Plenum Press, New York, 1972), p. 245.CrossRefGoogle Scholar
[10] Mcqueen, H.J. and Jonas, J.J., in Treaies on Materials Science and Technology, Vol.6, (1975) p. 393.Google Scholar
[11] Baker, I., Viens, D.V., and Schulson, E.M.; Scripta Metall. 18 237 (1984).Google Scholar