Hostname: page-component-745bb68f8f-cphqk Total loading time: 0 Render date: 2025-01-15T06:57:47.619Z Has data issue: false hasContentIssue false
  • English
  • Français

Reprocessing of Sintered and Melt High Temperature Superconducting Materials

Published online by Cambridge University Press:  15 February 2011

C. Vipulanandan  and
B. Martinz
C. Vipulanandan
Affiliation:
Materials Engineering Laboratory, Texas Center for Superconductivity, University of Houston Houston, Texas 77204-5932, USA
B. Martinz
Affiliation:
Materials Engineering Laboratory, Texas Center for Superconductivity, University of Houston Houston, Texas 77204-5932, USA
Get access

Abstract

Increasing use of High Temperature Superconducting Ceramics (HTSC) in various applications and the cost of the new superconducting powder dictated the need for evaluating the potential of reusing the old HTSC material (yittrium-barium-copper oxide (YBCO); YBa2Cu3O7-x) with minimum reprocessing. This study examined various methods to reprocess two years old sintered and melt bulk YBCO ceramics. YBCO components were ground and processed with and without adding various amount of silver powder, organic binders and new YBCO powder. The reprocessed YBCO powder was also characterized at every step of processing using X-ray diffraction (XRD) and Differential Thermal Analysis (DTA) to identify impurities.

The old YBCO components were first crushed and then ground using automatic grinder and a jet-mill. The ground powder was then mixed with additives and/or binders and compacted uniaxially to 45 ksi. The range of sintereing temperatures from 905 °C to 980 °C were selected based on the past history of sintering/melting temperatures. The reground powder was found to have impurity phases due to its exposure to carbon dioxide and humidity in the atmosphere. Addition of Ag powder resulted in higher relative densities at lower sintering temperatures. The need for re-calcination of used powders was also considered to improve the performance of reprocessed powders. The sintering temperature was selected based on achieving 85% relative density. The results show that the reprocessed powders have to be sintered at higher temperatures than their previous history. The sintered and melt-textured YBCO made from reprocessed powder had similar or better superconducting properties compared to the new powder.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 344: Symposium I – Materials and Processes for Environmental Protection , 1994 , 307
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Scalapino, D. J., Clarke, D. R., Clarke, J., Schwall, R. E., Clark, A. F., and Finnemore, D. K., Cryogenics, 28, (1988) 711.Google Scholar
2. Salib, S. and Vipulanandan, C., J. Am. Ceram. Soc. 73, (1990) 2323.Google Scholar
3. Low, I. M. and Lim, F.W., J. Mater. Sci. Lett. 10, (1991) 1119.Google Scholar
4. Singh, J. P., Leu, H. J., Poeppel, R. B., van Voorhees, E., Goudey, G. T., Winsley, K. and Shi, D., J. Appl. Phys. 66, (1989), 3154.Google Scholar
5. Nishio, T., Itoh, Y., Ogasawara, F., Suganuma, M., Yamada, Y. and Mizutani, U., J. Mater. Sci. 24, (1989), 3228.Google Scholar
6. Matsumuro, A., Kasumi, K., Mizutani, U. and Senoo, M., J. Mater. Sci. 26, (1991), 737.Google Scholar
7. Goretta, K. C., Kullberg, M., Bär, D., Dorris, S. E., Balachandran, U., Poeppel, R. B. and Routbort, J. L., Proc. 1990 TMS Spring Mtg., Anaheim, CA (1990).Google Scholar
8. Lee, D. and Salama, K., Jpn. J. Appl. Phys. 29, (1990) L2017.Google Scholar
9. Yeou, L. S., M. S. Thesis, Texas Center for Superconductivity, (1992), 107.Google Scholar
10. Yeh, F. and White, K. W., J. Appl. Phys. 70, (1991) 4989.Google Scholar
11. Evans, A.G., J. Am. Ceram. Soc. 73, (1990), 187.Google Scholar
12. Metals Handbook, 9th edition, 2, ASM, (1979) 671.Google Scholar
13. Barkatt, A., Hojaji, H., Amarakoon, V.R.W. and Fagan, J.G., MRS Bulletin (1993) 298.Google Scholar