Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-10T07:25:55.883Z Has data issue: false hasContentIssue false
  • English
  • Français

Scanning Tunneing Microscope Study of Cadmiun Telluride

Published online by Cambridge University Press:  26 February 2011

H. S. Kim ,
Y. C. Zheng  and
P. J. Bryant
H. S. Kim
Affiliation:
Physics Department, University of Missouri-Kansas City; 1110 E. 48th; K.C., MO 64110
Y. C. Zheng
Affiliation:
Physics Department, University of Missouri-Kansas City; 1110 E. 48th; K.C., MO 64110
P. J. Bryant
Affiliation:
Physics Department, University of Missouri-Kansas City; 1110 E. 48th; K.C., MO 64110
Get access

Abstract

Layered samples of cadmium telluride grown epitaxially on gallium arsenide substrates have been investigated by means of scanning tunneling microscopy (STM). The surface geometric and electronic structures are both of interest. Techniques were developed to remove the native oxide by etching, or to create a fresh surface by cleaving, and to protect them from oxidation by employing mineral or paraffin oil media. STM studies were conducted within the protective medium. These techniques were adapted and tested for both etched and cleaved samples of Si, CdTe and HgTe. The currentvoltage characteristics of the CdTe surface were investigated during dynamic changes of the tunnel current and barrier height while the probe-to-sample separation (gap) was static. Recorded values are shown for current versus bias for several constant gap values. A range of bias values has been employed to test a possible solution for the problem of interference between the contributions from geometric and electronic structure factors.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 102 , 1987 , 109
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Lu, Ping and Smith, David J., Phys. Rev. Lett., 59, (19) 2177 (1987).Google Scholar
2.Bryant, Garnett W., Phys. Rev. B, 36, (12) 6465 (1987).Google Scholar
3.Horning, R.D., Staudenmann, J.-L., Appl. Phys. Lett., 50, 21 (1987).Google Scholar
4.Feenstra, R.M. and Oehrlein, G.S., Appl. Phys. lett, 47 (2) 97 (1985).Google Scholar
5.Binnig, G., Rohrer, H., Gerber, Ch., and Weibel, E., Phys. Rev. Lett. 50 (2) 120 (1983).Google Scholar
6.Bryant, P.J., Kim, H.S., Zheng, Y.C. and Yang, R., Rev. Sci. Instr., 58, (6) 1115 (1987).Google Scholar
7.Bryant, P.J., Kim, H.S., Yang, R., Zheng, Y.C. and Miller, R., J. Vac. Sci. and Tech., March/April 1988.Google Scholar