Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-10T20:17:20.495Z Has data issue: false hasContentIssue false
  • English
  • Français

Self-selective Epitaxial Growth of BST Films: toward Nano-composite Structure for Microwave Tunable Devices

Published online by Cambridge University Press:  01 February 2011

Tomoaki Yamada ,
Vladimir O. Sherman ,
Andreas Noeth ,
Paul Muralt ,
Alexander K. Tagantsev  and
Nava Setter
Tomoaki Yamada
Affiliation:
tomoaki.yamada@epfl.ch, Swiss Federal Institute of Technology, EPFL, Ceramics Laboratory, STI-IMX-LC, MXD 210, Station 12, Lausanne, VD, CH-1015, Switzerland, +41 21 693 4952, +41 21 693 5810
Vladimir O. Sherman
Affiliation:
vladimir.cherman@epfl.ch, Swiss Federal Institute of Technology, EPFL, Ceramics Laboratory, Lausanne, CH-1015, Switzerland
Andreas Noeth
Affiliation:
andreas.noeth@epfl.ch, Swiss Federal Institute of Technology, EPFL, Ceramics Laboratory, Lausanne, CH-1015, Switzerland
Paul Muralt
Affiliation:
Paul.Muralt@epfl.ch, Swiss Federal Institute of Technology, EPFL, Ceramics Laboratory, Lausanne, CH-1015, Switzerland
Alexander K. Tagantsev
Affiliation:
alexander.tagantsev@epfl.ch, Swiss Federal Institute of Technology, EPFL, Ceramics Laboratory, Lausanne, CH-1015, Switzerland
Nava Setter
Affiliation:
nava.setter@epfl.ch, Swiss Federal Institute of Technology, EPFL, Ceramics Laboratory, Lausanne, CH-1015, Switzerland
Get access

Abstract

Ba0.3Sr0.7TiO3 (BST) thin film composite structures were fabricated by means of a selective epitaxial growth process. The epitaxial growth of BST on SrRuO3 electrode surface was selectively achieved at 450∼485°C using a prepatterned ultra-thin amorphous BST layer that locally prevented crystallization. This self build-up mechanism resulted in a columnar composite structure, where epitaxial and amorphous BST columns are electrically connected in parallel. The epitaxial BST showed a high permittivity and a high tunability, whereas the amorphous BST showed a significantly lower permittivity and a very weak tunable behavior. The effective permittivity of the composite capacitors decreased linearly upon increasing the amorphous BST concentration q, while the tunability stayed fairly unchanged until q reached 70%, which agrees with the theoretical ferroelectric/dielectric parallel composite model. The results also give indirect evidence of a good separation between both BST phases.

Keywords

ferroelectricfilmcomposite
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 928: Symposium GG – Current and Future Trends of Functional Oxide Films , 2006 , 0928-GG01-03
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Vendik, O. G., Hollman, E. K., Kozyrev, A. B., and Prudan, A. M., J. Supercond., 12, 325 (1999).Google Scholar
2. Tagantsev, A. K., Sherman, V. O., Astafiev, K. F., Venkatesh, J., and Setter, N., J. Electroceramics, 11, 5 (2003), and References therein.Google Scholar
3. Cole, M. W., Joshi, P. C., and Ervin, M., J. Appl. Phys., 89, 6336 (2001).Google Scholar
4. Sherman, V. O., Tagantsev, A. K., and Setter, N., J. Appl. Phys., (2005) (submitted).Google Scholar
5. Sherman, V.O., Tagantsev, A.K., and Setter, N., Proceedings of the 2004 14th IEEE Int. Symp. on Application of Ferroelectrics, Montreal, 33 (2004).Google Scholar
6.Since the XRD peaks of underlying SRO and STO are close to those of BST, the amorphicity of the film was also confirmed by XRD of the identical films grown on sapphire substrate.Google Scholar
7. Bhuiyan, M. N. K., Kimura, H., Tambo, T., and Tatsuyama, C., Appl. Sur. Sci., 249, 419 (2005).Google Scholar
8. Chiu, M.-C., Cheng, C.-F., Wu, W.-T., and Shieu, F.-S., J. Electrochem. Soc., 152, F66–F70 (2005).Google Scholar
9. Morii, K., Kawano, H., Fujii, I., Matsui, T., and Nakayama, Y., J. Appl. Phys., 78, 1914 (1995).Google Scholar
10.β of SrTiO3 ( ≍ 8 ×109 JC -4 m -5) is customarily taken as temperature independent and is much greater than that of BaTiO3 (see References in Ref. 2). Therefore, β of BST with a relatively high Sr concentration can be estimated assuming a proportional variation with composition.Google Scholar
11.For accuracy, taking into account both tunabilities of epitaxial and amorphous BSTs, .Google Scholar