Hostname: page-component-6bf8c574d5-xtvcr Total loading time: 0 Render date: 2025-02-22T16:55:04.088Z Has data issue: false hasContentIssue false
  • English
  • Français

The Status and Potential of Rapid Solidification of Magnesium Alloys

Published online by Cambridge University Press:  25 February 2011

F. Hehmann  and
H. Jones
F. Hehmann
Affiliation:
Department of Metallurgy, University of Sheffield, Sheffield Sl 3JD, U.K.
H. Jones
Affiliation:
Department of Metallurgy, University of Sheffield, Sheffield Sl 3JD, U.K.
Get access

Abstract

In spite of giving exceptionally low density and excellent machinability at relatively low cost, magnesium alloys have found only restricted application as engineering materials to date because of limitations in formability, corrosion resistance, strength and creep resistance. Although the very earliest work on record to employ rapid solidification as a means to enhance engineering properties was carried out on magnesium-base alloys, subsequent work employing more modern techniques has not, until very recently, been motivated by the need for alloy development. The present study combines a critical survey of relevant published work with an assessment of the potential of magnesium-base alloys for development by the rapid solidification route.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 58 , 1985 , 259
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.BUSK, R S and LEONTIS, T E, Trans AIME, 1950, 188, 297–306.Google Scholar
2.FOERSTER, G S and JOHNSON, H A, Product Engineering, 1958, 29(19), 80–81.Google Scholar
3.BUSK, R S, Light Metals, 1960, 23 (266), 197–200.Google Scholar
4.FOERSTER, G S, Metals Eng. Quart,, 1972, 12(1), 22–27.Google Scholar
5.LUO, H L, CHAO, C C and DUWEZ, P, Trans. Met, Soc. AIME, 1964, 230, 1488–90.Google Scholar
6.ABE, H, ITO, K and SUZUKI, T, J Fac. Eng. Univ. Tokyo, 1970, 10, 60–1.Google Scholar
7.BELYANIN, A F, bul'enkov, N A, MARTOVITSKY, V R and TOPORENSKAYA, T A, Tr. Moskov. Insto Toukoi IKhim. Tekhnol., 1974, 4(1), 3–7.Google Scholar
8.SOMMER, F, Z Metallkunde, 1981, 72, 219–224.Google Scholar
9.SOMMER, F, VOGELBEIN, W and PREDEL, B, J Non-Cryst. Solids, 1982, 51, 333–43.Google Scholar
10.VARICH, N I and LITVIN, B N, Physo Met, Metal logr., 1963, 16(4), 29–32.Google Scholar
11.VAN, A MKRAAN, DER, Phys. Rev. B, 1982, 25, 3311–18.Google Scholar
12.BUSCHOW, K H J and ENGEN, P G VAN, Solid State Communo, 1981 39, 1–3.Google Scholar
13.SOMMER, F, BUCHER, G and PREDEL, B, J Physique, 1980, 41, C8–563 to 566.Google Scholar
14.SOMMER, F, FRIPAN, M and PREDEL, B, in ‘Rapidly Quenched Metals’ (RQ4), ed. Masumoto, T and Suzuki, K, The Japan Inst. Met, Sendai, 1982, pp. 209–212.Google Scholar
15.SOMMER, F, HAAS, H and PREDEL, B, in ‘Phase Transformations in Crystalline and Amorphous Alloys’, ed. Mordike, B L, Deutsche Gesellschaft fur Metalikunde, Oberursel, 1983, pp. 95–112.Google Scholar
16.MATSUDA, T and MIZUTANI, U, Solid State Commun., 1982, 44, 145–9.Google Scholar
17.NASSIF, E, LAMPARTER, P, SPERL, W and STEEB, S, Z Naturforsch, 1983, 38a, 142–8.Google Scholar
18.(a) FALCH, S and STEEB, S, Mikrochim. Acta, 1983, Suppl. 10, 261–9; (b) S FALCH, P LAMPARTER and S STEEB, Z Naturforsch, 1984, 39a, 1175-83.Google Scholar
19.MADER, S, J Vac. Sci. Technol., 1965, 2, 35–41; in ‘The Use of Thin Films in Physical Investigations’ ed. J C Anderson, Academic, New York, 1966, 20.Google Scholar
(a) MIZUTANI, U and YOSHIDA, T, J Phys, F; Met. Phys., 1982, 12, 2331–48;Google Scholar
(b) MIZUTANI, U and YOSHINO, K, J Non-Cryst. Solids, 1984, 61,62, 1313–18.Google Scholar
21.MIZUTANI, U and MATSUDA, T, J Phys. F; Met. Phys., 1984, 14, 2995–3006; in ‘Rapidly Quenched Metals’ (RQ5), ed. S Steeb and H Warlimon--T, Elsevier, New York, 1985, pp. lO 35-38.Google Scholar
22.CALKA, A et al., Scripta Net., 1977, 11, 65–70; in ‘Amorphous Magnetism II’, ed. R A Levy and R Hasegawa, Plenum,-Tew York, 1977, pp. 197-205.Google Scholar
23.CALKA, A and MATYJA, H, in ‘Amorphous Metallic Materials’, ed. Duhaj, P and Mrafko, P, VEDA, Bratislava, 1980, pp. 71–82.Google Scholar
24.Boswell, P G, Mater. Sci. Eng., 1978, 34, 1–5.Google Scholar
25.HAUSER, J J and TAUC, J, Phys. Rev. B, 1978, 17, 3371-80.Google Scholar
26.LIARD, M et al, in ‘Rapidly Quenched Metals IIl’, ed. Cantor, B, The Metals Society, London, 1978, Vol. 2, pp. 29–35.Google Scholar
27.HAFNER, J, GRATZ, E and GUNTHERODT, H J, J Physique, 1980, 41, C8–512 to 515.Google Scholar
28.SUCK, J B et al, J Phys. C: Solid State Phys., 1980, 13, LI045–51; ibid., 1981, 14, 2305-17; as ref. 14 (1982) pp. 407-410; Phi?. Rev. Lett., 1983, 50, 492; J Non-Cryst. Solids, 1984, 61, 62, 295-302.Google Scholar
29.RUDIN, H, JOST, S and GUNTHERODT, H J, J Non-Crysto Solids, 1984, 61, 62, 291–4.Google Scholar
30.MIZOGUCHIet, T al, J Physique, 1980, 41, C8–183 to 185; 3 Non-Cryst. Solids, 1984, 61, 62, 285-290.Google Scholar
31.MIZUTANI, U and MIZOGUCHI, T, J. Phys. F: Metal Phys., 1981, 111, 1385–91.Google Scholar
32.SHIOTANI, N et al, J Phys. Soc. Japan, 1981, 50, 828–834; as ref,14, pp. 667-70.Google Scholar
33.MATSUDA, T and MIZUTANI, U, J Phys. F; Metal Phys., 1982, 12, 1877–90; and as ref. 14, pp. 1315-18.Google Scholar
34.ITO, M et al, Phil. Mag., 1984, A49, L9–L12; J Non-Cryst. Solids, 61, 62, 303-308.Google Scholar
35.MATSUDA, T, SHIOTANI, N and MIZUTANI, U, J Phys. F: Met. Phys., 1984, 14, 1193–1204.Google Scholar
36.ALTOUNIAN, Z, GUO-HUA, T and STROM-OLSEN, J O, J Mater. Sci., 1982, 17, 3268–74Google Scholar
37.BAIBICH, M N, MUIR, W B, ALTOUNIAN, Z and GUO-HUA, T, Phys. Rev. B, 1982, 26, 2963–6.Google Scholar
38.FRITSCH, G, WILLER, J, WILDERMUTH, A and LUSCHER, E, J Phys. F: Metal Phys., 1982, 12, 2965–74.Google Scholar
39.POON, S J, DUNN, P L and SMITH, L M, J Phys. F: Met. Phys., 1982, 12, L101–6; P L DUNN and S J POON, ibid. pp. L273-8.Google Scholar
40.BERG, R VAN DEN, GRONDEY, S, KASTNER, J and LOHNEYSON, H V, Solid State Commun., 1983, 47, 137–140.Google Scholar
41.VAN, N NGUYEN, FISSON, S and THEYE, M L, J Non-Cryst. Solids, 1984, 61/62, 1325–9; M-O THEYE, V NGUYEN-VAN and S FISSON, Phys. Rev. B, 1985, 31, 1 $47S5.Google Scholar
42.SADOC, A, KRISHNAN, R and ROUGIER, P, J Phys. F: Metal Phys., 1985, 15, 241–7.Google Scholar
43.V, YPRASAD, S S, AGARWAL, S L, CHATTOPADHYAY, K and RAMACHANDRARAO, P, as ref. 21, pp. 39–42.Google Scholar
44.(a) PREDEL, B and HULSE, K, (a) Less, JCommon Metals, 1979, 63, 45-56, 245–56; (b) B PREDEL, Physica, 1981, 103B, 113-122.Google Scholar
45.MOTA, A C, BREWSTER, P and WANG, R, Phys. Lett., 1972, 41A, 99–101.Google Scholar
46.SUGANUMA, R, J Phys. Soc. Japan, 1959, 14, 685–6.Google Scholar
47.ABE, H, ITO, K and SUZUKI, T, Trans. Jap. Inst. Met., 1970, 11, 368–370.Google Scholar
48.FERRIER, R P and HERRELL, D J, J Non-Cryst. Solids, 1970, 2, 278–283; 1970, 4, 338-344.Google Scholar
49.SLOWIK, J H and BROWN, F C, Phys. Rev. Lett., 1972, 29, 934–937.Google Scholar
50.SLOWIK, J H, Phys. Rev. B, 1974, 10, 416–431.Google Scholar
51.BRINGANS, R D and SUTTON, C M, Solid State Commun., 1976, 19, 277–9.Google Scholar
52.ABE, H, ITO, K and SUZUKI, T, Acta Met., 1970, 18, 991–994.Google Scholar
53.FERRIER, R P and HERRELL, D J, Phil. Mag., 1969, 19, 853–868.Google Scholar
54.SIK, M J and FERRIER, R P, Phil. Mag., 1974, 29, 877–894.Google Scholar
55.SUTTON, C M, Solid State Commun., 1975, 16, 327–330.Google Scholar
56.CALKA, A, unpublished preprint of contribution submitted to RQ5, Wurzburg, September 1984.Google Scholar
57.HEIMENDAHL, L VON, J Phys. F: Met. Phys., 1979, 9, 161–9; J HAFNER and L VON HEIMENDAHL, Phys. Rev. Lett., 1979, 42, 386-9. 58. J HAFNER, Phys. Rev., B, 1980, 21, 406-25; 1983, 28, 1734-9; in ‘Amorphous Materials-Modelling of Structure-and Properties. NFWt. Soc. AIME, Warrendale, Pa., 1983, p. 201–9; in ‘Structure of Non-Crystalline Materials’, Taylor and Francis, New York, 1983, pp. 539-49; Phys. Rev. B, 1983, 27, 678-95; J Phys. C:Solid State, 1983, 16, 5773-92; J Non-Cryst. Solids, 1984, 61, 62, 523-8; ibid., 1985, 69, 32S-45.Google Scholar
59.COCHRANE, R W et al., Physica, 1981, 107B, 131–2.Google Scholar
60.SUCK, J B, RUDIN, H, GUNTHERODT, H J and BECK, H, J Phys. F: Met. Phys., 1981, 11, 1375–83; J B SUCK and H RUDIN, in ‘Glassy Metals I’, ed. H Beck and TFJ GUntherodt, Springer-Verlag, Berlin, 1983, pp. 217-59.Google Scholar
61.SEN, M and CHATTERJEE, S, Phys. Stat. Sol. (b), 1982, 111, 353–9.Google Scholar
62.RAHMANN, S M MUJIBAR, Z Phys. B - Cond. Mat., 1982, 45, 307–13.Google Scholar
63, (a) MEISEL, L V and COTE, P J, Physo Rev. B, 1983, 27, 4617–27, (b) P J COTE and L V MEISEL, J Non-Cryst. Solids, 1984, 61, 627-1167-72.Google Scholar
64.LAAKKONEN, J and NIEMINEN, R M, J Phys. F: Met. Phys., 1983, 13, 2265–80.Google Scholar
65.HARRIS, R and MULIMANI, B G, Phys. Rev. B, 1983, 27, 1382–5.Google Scholar
66.HAFNER, J and PHILIP, A, J Phys. F: Met, Phys., 1984, 14, 1685–91.Google Scholar
67.MATSUDA, T, MIZUTANI, U, MUIR, W B and FROM, M, J Phys. F: Met. Phys., 1984, 14, L21–3.Google Scholar
68.KATTAMIS, T Z, in ‘Lasers in Metallurgy’, ed. Mukherjee, K and Mazumdar, J, The Met, Soc. of AIME, Warrendale, Pa., 1981, pp. 1–10.Google Scholar
69.MASUR, L J, BURKE, J T, KATTAMIS, T Z and FLEMINGS, M C, in ‘Rapidly Solidified Amorphous and Crystalline Alloys’, ed. Kear, B H et al, Elsevier, New York, 1982, pp. 185–9.Google Scholar
70.SKJERPE, P, Mater. Sci. and Technol., 1985, 1, 316–20.Google Scholar
71.MESCHTER, P J and O'NEAL, J E, Met. Trans. A, 1984, 15A, 237–40.Google Scholar
72.(a) CHISHOLM, D S and BUSK, R S, U S Pat. 2630623 (1953), Brit. Pat. 662 312 (1951); (b) D S CHISHOLM, U S Pat. 2676359 (1954); (c) G F HERSHEY and N R COLBRY, U S Pat. 2934787 (1960).Google Scholar
73.LEONTIS, T E and BUSK, R S, U S Pat. 2659131 (1953), Brit. Pat. 690783 (1953).Google Scholar
74.COLBY, N R and HERSHEY, G F, U S Pat. 2699 576 (1955), Brit. Pat. 746301 (1956)Google Scholar
75.CHISHOLM, D S and HERSHEY, G F, U S Pat. 2752196 (1956), Brit. Pat. 783685 (1957).Google Scholar
76.FOERSTER, G S, U S Pat. 3067028 (1962).Google Scholar
77.FOERSTER, G S, U S Pat. 3182390 (1965).Google Scholar
78.FOERSTER, G S, U S Pat. 3219490 (1965).Google Scholar
79.KAUFMANN, A R, U S Pat. 3099041 (1963).Google Scholar
80.ISSEROW, S and RIZZITANO, F J, Internat. J Powd. Met., 1974, 10, 217–27.Google Scholar
81.FLEMINGS, M C and MORTENSEN, A, AD-AI50l270, September 1984.Google Scholar
82.DAS, S K and CHANG, C F, in ‘Rapidly-Solidified Crystalline Alloys’, ed. Das, S K et al., The Met. Soc. AIME, Warrendale, Pa., in press.Google Scholar
83.MESCHTER, P J, LEDERICH, R J and E, J O'NEAL, Met. Trans. A, in press.Google Scholar
84.HANSEN, M, Constitution of Binary Alloys, McGraw Hill, New York, 1958, and Supplements by R P ELLIOTT, 1965 and F A SHUNK, 1969.Google Scholar
85.MOFFATT, W G, The Handbook of Binary Phase Diagrams, Genium Publ. Corp., Schenectady, NY, 1978 and updates.Google Scholar
86.Bull. of Alloy Phase Diagrams, 1980, 1, 108-9; 1982, 3, 60-74; 1984, 5, 23-30, 36-48, 348-74; 454-76, 579-92; 19857 6, 37-42, 59-66, 149-67, 235-51 and to be published.Google Scholar
87.JONES, H, in ‘Rapidly Solidified Metastable Materials’, ed. Kear, B H and Giessen, B C, Elsevier, New York, 1984, pp. 303–315.Google Scholar
88.BUSK, R S, Trans. AIME, 1950, 188, 1460–64.Google Scholar
89.ENGEL, N, Acta Met., 1967, 15, 565–7.Google Scholar
90.HEHMANN, F, M.Met. Dissertation, Sheffield, 1984.Google Scholar
91.RAY, R, Metal Progress, 1982, 121 (7), 29–31.Google Scholar
92, DAS, S K, DAVIS, L A, WANG, J R Y and KAPOOR, D, in ‘Rapid Solidification Processing: Principles and Technologies III’, ed, Mehrabian, R, NBS, Gaitherburg, Md., 1982, pp. 559–564.Google Scholar
93.ALAMO, A and BANCHIK, A D, J Mater. Sci., 1980, 15, 222–9.Google Scholar
94.CARAPELLA, L A, Metal Progress, 1945, 48, 297–307.Google Scholar