Article contents
Supporting metal catalysts on modified carbon nanocones to optimize dispersion and particle size
Published online by Cambridge University Press: 31 January 2011
Abstract
Carbon nanocones are the fifth allotropic form of carbon, first synthesized in 1997. They have been selected for investigating hydrogen storage capacity, because initial temperature programmed desorption experiments found a significant amount of hydrogen was evolved at ambient temperatures. The aim of this work was to study the effect of impregnation conditions on metal catalyst dispersion and to investigate whether the metal loaded cones had improved hydrogen storage characteristics. Pre-treatment of carbon nanocones with hydrogen peroxide was carried out, followed by metal decoration in aqueous solution by an incipient wetness technique. Two methods of reducing the metal catalyst have been applied: in hydrogen at room temperature (RT) and in an aqueous solution of NaBH4. XRD confirmed the complete metal reduction and TEM showed that the reduction technique affected the catalyst dispersion. Very fine dispersions of ca. 1 nm diameter metal clusters at catalyst loadings of 5 wt.% were achieved and high dispersions were retained for loadings as high as 15 wt.%. Hydrogen uptakes at RT were measured and an increase with metal loading was observed.
Keywords
- Type
- Research Article
- Information
- MRS Online Proceedings Library (OPL) , Volume 1216: Symposium W – Hydrogen Storage Materials , 2009 , 1216-W02-02
- Copyright
- Copyright © Materials Research Society 2010
References
- 2
- Cited by