Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-01-30T00:03:04.008Z Has data issue: false hasContentIssue false
  • English
  • Français

Tensile, Creep Properties and Microstructural Correlations in an Extruded Ti-48Al Alloy

Published online by Cambridge University Press:  01 January 1992

G. Babu Viswanathan  and
Vijay K. Vasudevan
G. Babu Viswanathan
Affiliation:
Dept. of Materials Science and Engineering, University of Cincinnati, Cincinnati, OH 45221
Vijay K. Vasudevan
Affiliation:
Dept. of Materials Science and Engineering, University of Cincinnati, Cincinnati, OH 45221
Get access

Abstract

In this study, new combinations of heat treatment and extrusion conditions was employed to produce fine-grained, nearly lamellar microstructures in a binary Ti-48 at.% Al alloy. The effect of subsequent heat treatment on microstructure was studied and room temperature tensile properties were determined for some representative microstructures with relatively high volume fractions of lamellar grains. High tensile strengths and ductilities (upto 2.3%) were obtained and microstructural factors thought to be responsible for these are discussed. Constant load tensile creep properties for the same microstructures were evaluated in the temperature range of 700 to 815°C for stresses from 103 to 241 MPa. This data was used to determine minimum creep rates, activation energies and stress exponents and their dependence on microstructure. A significant effect of microstructure, particularly volume fraction of lamellar grains on the creep rates was observed, and creep rates comparable to those reported in quarternary Ti-48Al alloys with similar microstructures were obtained. The various results suggest that it is possible to obtain an attractive and balanced combination of room temperature ductility and high temperature creep resistance in these materials by suitably varying thermomechanical processing and heat treatment conditions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 787
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kim, Y. W., J. of Metals, 41, 24 (1989).Google Scholar
2. Huang, S. C. and Hall, E. L., MRS Symp. Proc., 133, 373 (1989).Google Scholar
3. Huang, S. C. and Hall, E. L., Metall. Trans, vol. 22A, 427 (1991).Google Scholar
4. Kim, Y. W., Acta Metall. Mater., 40, 1121 (1992).Google Scholar
5. Tsujimoto, T. and Hashimoto, K., MRS Symp. Proc., 133, 391 (1989).Google Scholar
6. Shih, D. S., Huang, S. C., Scarr, G. K., Jang, H. and Chesnutt, J. C.: in: Microstructure/Property Relations in Titanium Aloys and Titanium Aluminides, Kim, Y. W. and Boyer, R. R. (eds.), p. 135, TMS-AIME, Warrendale, PA (1991).Google Scholar
7. Kad, B. and Hazzledine, P. M., these proceedings.Google Scholar
8. Beavan, P. A., these proceedings.Google Scholar
9. Martin, P. L., Mendiratta, M. G. and Lipsitt, H. A., Metall. Trans., 14A, 2170 (1983).Google Scholar
10. Hayes, R. W. and London, B., Acta Metall. et Mater., 40, 2167 (1992).Google Scholar
11. Ruano, O. A., Wadsworth, J. and Sherby, O. D., Acta Metall., 36, 1117 (1988).Google Scholar
12. Kroll, S. et al. , Z. Metallk., 83, 8 (1992).Google Scholar
13. Wheeler, D. A., London, B. and Larsen, D. E. Jr., Scripta Metall. et Mater., 26, 939 (1992).Google Scholar