Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-10T10:03:26.134Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal and Kinetic Analysis of the solidification of a near eutectic Al-Cu Alloy

Published online by Cambridge University Press:  30 July 2014

M. Morua ,
M. Ramirez-Argaez  and
C. Gonzalez-Rivera
M. Morua
Affiliation:
Departamento de Ingeniería Metalúrgica, Facultad de Química, UNAM, Edificio D Circuito de los Institutos s/n Cd. Universitaria Mexico D.F., Mexico.
M. Ramirez-Argaez
Affiliation:
Departamento de Ingeniería Metalúrgica, Facultad de Química, UNAM, Edificio D Circuito de los Institutos s/n Cd. Universitaria Mexico D.F., Mexico.
C. Gonzalez-Rivera
Affiliation:
Departamento de Ingeniería Metalúrgica, Facultad de Química, UNAM, Edificio D Circuito de los Institutos s/n Cd. Universitaria Mexico D.F., Mexico.
Get access

Abstract

In this work the thermal and kinetic analysis of the cooling and solidification of a near eutectic Al-Cu alloy is performed using inverse thermal and solidification kinetics analysis. The Fourier thermal analysis is applied to experimental cooling curves to obtain data on solid fraction evolution and latent heat of solidification. Inverse thermal analysis is applied to calculate the global heat transfer coefficients that allow correct simulation of the cooling of experimental probes. The free growth method is used to obtain the eutectic growth coefficients. All the obtained parameters are feed into a heat transfer-solidification kinetics model to validate the methodology and results generated from this work. It is found a relatively good agreement between experimental and predicted cooling curves which suggest that this methodology could be used to generate useful information needed to simulate eutectic solidification.

Keywords

solidificationphase transformationeutectic
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1611: Symposium 4A – Advanced Structural Materials--2013 , 2014 , pp. 105 - 110
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Morua, M., Ramírez-Argaez, M. and Gonzalez-Rivera, C..,“Experimental Determination Of Grain Growth Kinetics During Eutectic Solidification”Mater. Science: An Indian Journal, 9, 31, (2013).Google Scholar
Morua, M.. Peña, E., Aparicio, R., Ramirez-Argaez, M. Gonzalez-Rivera, y C.. “Numerical processing of cooling curves to obtain growth parameters during eutectic solidification”Proc. IMRC 2011, Symposium 4 Advanced Structural Materials. 1373 (2012).Google Scholar
Morua, M., Ramirez-Argaez, M. and Gonzalez-Rivera, C.. “On the characterization of eutectic grain Growth during solidification” Proc. IMRC 2012, Symposium 9 Advanced Structural Materials. 1485 (2012).Google Scholar
Dioszegi, A. and Svensson, I. L.“Inverse kinetic analysis method to study eutectic growth” Int.J. of Cast Metal Res., 18, 41(2005).CrossRefGoogle Scholar
Degand, C., Stefanescu, D.M., and Laslaz, G.. “An experimental and analytical study of equiaxed eutectic grain Growth in Al-Si alloys” Proc. Int. Symp.On Advanced Materials and Technology for the 21st Century, Honolulu,USA, 55, (1995).Google Scholar
Ohnaka, and Stefanescu, D.M. eds., TMS, Warrendale Pa., 55, 149 (1996).Google Scholar
Fras, E., Kapturkiewicz, W., Burbielko, A., and Lopez, H.F., AFS Trans., 101, 505, (1993).Google Scholar
Santos, C.A., Quaresma, J.M.V, Garcia, A. “Determination of transient interfacial heat transfer coefficients in chill mold castings” J. of Alloy and Compounds, 319, 174,(2001).CrossRefGoogle Scholar