Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-14T06:35:20.879Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermoelectric Properties of Zr0.5Hf0.5Ni0.8Pd0.2Sn0.99Sb0.01 half-Heusler Alloy with WO3 Inclusions

Published online by Cambridge University Press:  01 February 2011

Julien Pierre Amelie Makongo Mangan ,
Pravin Paudel ,
Dinesh Misra  and
Pierre F. P. Poudeu
Julien Pierre Amelie Makongo Mangan
Affiliation:
jmakongo@uno.edu, University of New Orleans, Advanced Material Research Institute, 2000 Lake Shore Drive, New Orleans, Louisiana, 70148, United States, 5043886966
Pravin Paudel
Affiliation:
ppaudel@uno.edu, University of New Orleans, Advanced Material Research Institute, 2000 Lake Shore Drive, New Orleans, Louisiana, 70148, United States, 5043886966
Dinesh Misra
Affiliation:
dmisra@uno.edudakkmisra@gmail.com, UNO, AMRI, SC2046B, AMRI, UNO, 2000 Lakeshore Drive, New Orleans, Louisiana, 70148, United States, 5047566703
Pierre F. P. Poudeu
Affiliation:
ppoudeup@uno.edu, University of New Orleans, Advanced Material Research Institute, 2000 Lake Shore Drive, New Orleans, Louisiana, 70148, United States, 5043886966
Get access

Abstract

Zr0.5Hf0.5Ni0.8Pd0.2Sn0.99Sb0.01 composites with various concentrations of WO3 inclusions were synthesized by mechanical alloying using high energy shaker mill. High density hot pressed pellets of the synthesized materials were characterized using powder X-ray diffraction and transmission electron microscopy and their thermoelectric properties were investigated in the temperature range from 300 to 750 K. The electrical conductivity of the composites at 300 K decreases from 2500 S/cm for 0 wt.% WO3 alloy to 2200 S/cm for the composite with 2 wt.% WO3 inclusion. The electrical conductivity of composites containing 5 wt.% and 10 wt.% WO3 inclusions showed sharp increases with increasing WO3 content. The electrical conductivity of the composites monotonically decreases with rising temperature. All samples showed n-type semiconducting behavior and the thermopower values decrease with increasing WO3 content. The lattice thermal conductivity of the composites increases with increasing WO3 content. However, these values are about 30% lower than that of Zr0.5Hf0.5Ni0.8Pd0.2Sn0.99Sb0.01 alloy prepared by high temperature solid-state techniques. The synthesized composites showed lower figure of merit than the half-Heusler matrix due to large reduction in the thermopower values with increasing WO3 content.

Keywords

reactive ball millingthermal conductivitythermoelectricity
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1267: Symposium DD – Thermoelectric Materials 2010-Growth, Properties, Novel Characterization Methods and Applications , 2010 , 1267-DD07-10
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Chen, L. D. Huang, X. Y. Zhou, M. Shi, X., Zhang, W. B. J. Appl. Phys. 99, 064305 (2006).Google Scholar
[2] Wang, H. T. Xu, Y. B. Goto, M., Tanaka, Y., Yamazaki, M., Kasahara, A. Tosa, M. Mater. Trans. 47, 1894 (2006).Google Scholar
[3] Sawada, S. Phys. Rev. 91, 1010 (1953).10.1103/PhysRev.91.1010Google Scholar
[4] Reich, S. Leitus, G. Tssaba, Y. Levi, Y. Sharoni, A. Millo, O. J. Superconductivity: Incorporating Novel Magnetism, 13, 855 (2000).10.1023/A:1007867710512Google Scholar
[5] Brown, B. W. Banks, E. J. Am. Chem. Soc. 76, 963 (1954).Google Scholar