Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-29T10:35:32.606Z Has data issue: false hasContentIssue false
  • English
  • Français

Analysis of Drop-on-Demand Ink Jet Print Head for Rapid Prototyping

Published online by Cambridge University Press:  17 March 2011

Dong-Youn Shin ,
Paul Grassia  and
Brian Derby
Dong-Youn Shin
Affiliation:
Manchester Materials Science Centre, UMIST, Grosvenor St., Manchester, M1 7HS, UK
Paul Grassia
Affiliation:
Department of Chemical Engineering, UMIST, PO Box 88, Manchester, M60 1QD, UK
Brian Derby
Affiliation:
Manchester Materials Science Centre, UMIST, Grosvenor St., Manchester, M1 7HS, UK
Get access

Abstract

The rapid prototyping industry is growing dramatically because of its high potential to reduce product design and prototyping cycles. One of the recent technologies in this field is 3D printing using conventional ink jet technology. In order to maximize the capability of this process, it is required to understand the operating mechanism and drop formation process. The current work focuses on the mechanism of a piezoelectric cylindrical actuator and the hydrodynamic characteristics inside a print head in order to achieve more realistic boundary conditions for the numerical simulation of the drop formation process. Linearised Navier-Stokes equations for Newtonian fluid flow are solved analytically for the pump section with a constant radius and for the nozzle section with a tapering angle. Results from the developed solutions are input to Flow 3D and it is observed that analytical pressure histories show better agreement with numerical results than axial velocity histories. The presented analytic model can be used for fully further drop formation simulation as an upstream pressure boundary within an acceptable tolerance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 698: Symposia Q/EE Electroative Polymers and Rapid Prototyping , 2001 , Q4.5.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dijksman, J. F., Hydrodynamics of small tubular pumps, J. Fluid Mech. 139, 173 (1984)Google Scholar
2. Bugdayci, N., Bogy, D. B. and Talke, F. E., Axisymmetric motion of radially polarized piezoelectric cylinders used in ink jet printing, IBM. J. Res. Dev. 27, 171 (1983)Google Scholar
3. Luck, R. and Agba, E. I., On the design of piezoelectric sensors and actuators, ISA. T. 37, 65 (1998)Google Scholar
4. Antohe, B. V. and Wallace, D. B., The determination of the speed of sound in liquids using acoustic resonance in piezoelectric tubes, Meas. Sci. Tech. 10, 994 (1999)Google Scholar
5. Hart, V. G. and Shi, J.Y., Governing equations for wave propagation in prestressed joined dissimilar elastic tubes containing fluid flow: with an example for a tapered section, Int. J. Eng. Sci. 33, 1121 (1995)Google Scholar
6. Benjamin, T. B. and Ursell, F., The stability of the plane free surface of a liquid in vertical periodic motion, P. Roy. Soc. Lond. A. Mat. A225, 505 (1954)Google Scholar