Hostname: page-component-5447f9dfdb-9hml6 Total loading time: 0 Render date: 2025-07-29T16:12:31.210Z Has data issue: false hasContentIssue false
  • English
  • Français

Analytical Prediction of the Pull-Out Behavior of Steel Fibers in Cement1tious Matrices

Published online by Cambridge University Press:  21 February 2011

George Nammur Jr. ,
Antoine E. Naaman  and
Samuel K. Clark
George Nammur Jr.
Affiliation:
George Nammur Jr. is a PhD candidate and a research assistant in the Department of Civil Engineering at the University of Michigan, Ann Arbor, MI 48109
Antoine E. Naaman
Affiliation:
Antoine E. Naaman is Professor of Civil Engineering at the University of Michigan, Ann Arbor, MI 48109
Samuel K. Clark
Affiliation:
Samuel K. Clark is Professor of Mechanical Engineering and Applied Mechanics at the University of Michigan, Ann Arbor, MI 48109
Get access

Extract

While typical pull-out tests have been, and still are carried out extensively in materials and structural research, the results of such tests are often incapacitated by a lack of understanding of the pull-out behavior. This shortcoming is the source of numerous basic mistakes in the interpretation of pull-out curves.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 114: Symposium R – Bonding in Cementitious Composites , 1987 , 217
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Greszczuk, L. B.; “Interfaces in Composites,” ASTM STP 452, 1969, pp 42–58.Google Scholar
2. Lawrence, P.; “Some Theoretical Considerations of Fibre Pull-Out from an Elastic Matrix,” Journal of Materials Science, Vol.7, 1972, pp. 1–6.Google Scholar
3. Bartos, P.; “Analysis of Pull-Out Tests on Fibres Embedded in Brittle Matrices,” Journal of Materials Science, Vol.15, 1980, pp. 3122–3128.Google Scholar
4. Laws, V.; “Micromechanical Aspects of the Fibre-Cement Bond,” Journal of Composites, Vol.13, No. 2, April 1982, pp. 145–151.CrossRefGoogle Scholar
5. Gopalaratnam, V. S., and Shah, S. P.; “Tensile Failure of Steel Fiber-Reinforced Mortar,” Engineering Mechanics Division of the ASCE Journal, Vol.113, No. 5, May 1987, pp. 635–652 Google Scholar