Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-14T05:06:36.633Z Has data issue: false hasContentIssue false
  • English
  • Français

Anisotropic Damage Production at ION Irradiated GaAs/AlAs Interfaces

Published online by Cambridge University Press:  28 February 2011

J. L. Klatt ,
J. Alwan ,
J. J. Coleman  and
R. S. Averback
J. L. Klatt
Affiliation:
Department of Materials Science and Engineering, University of Illinois at Urbana-Champaigjn, Urbana, IL. 61801
J. Alwan
Affiliation:
Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, IL. 61801
J. J. Coleman
Affiliation:
Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, IL. 61801
R. S. Averback
Affiliation:
Department of Materials Science and Engineering, University of Illinois at Urbana-Champaigjn, Urbana, IL. 61801
Get access

Abstract

Ion beam mixing and damage production at GaAs-AlAs interfaces was studied by Rutherford backscattering and channeling methods. It was observed that the general features of the intermixing of GaAs with AlAs at 100K are typical of that in other semiconductor and metallic systems but that the damage production is not. The GaAs layers amorphize at a very low ion dose whereas the AlAs layers are very resistant to amorphization. Damage in the AlAs begins at one interface of the GaAs and grows through the AlAs layer, but damage at the other interface never nucleates. The ratio of nuclear to electronic stopping influences the growth of the damage zone.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 235: Symposium A – Phase Formation and Modification by Beam-Solid Interactions , 1991 , 235
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bryan, R.P., Miller, L.M., Cockerill, T.M., Coleman, J.J., Klatt, J.L., and Averback, R.S., Phys. Rev. B 41, 3889 (1990).Google Scholar
2. Cullis, A.G., Chew, N.G., Whitehouse, C.R., Jacobson, D.C., Poate, J.M., and Pearton, S.J., Appl. Phys. Rev. 55, 1211 (1989).Google Scholar
3. Bode, M., Ourmazd, A., Rentschler, J.A., Hong, M., Feldman, L.C., and Mannaerts, J.P., in Beam-Solid Interactions: Physical Phenomena, edited by Knapp, J.A., Borgesen, P., Zuhr, R.A. (Mater. Res. Soc. Proc. 157, Pittsburgh, PA 1990) pp. 197–202. Google Scholar
4. Coleman, J.J. and Dapkus, P.D., in Gallium Arsenide Technology, edited by Ferry, D.K. (Howard W. Sams, Indianapolis, IN 1985) p. 79.Google Scholar
5. Cullis, A.G., Smith, P.W., Jacobsen, D.C., and Poate, J.M., J. Appl. Phys 69, 1279 (1991).CrossRefGoogle Scholar
6. Biersack, J.P., Nucl. Instrum. Methods B 19, 32 (1987).CrossRefGoogle Scholar
7. Jencic, I., Bench, M.W., Robertson, I.M., and Kirk, M.A., J. Appl. Phys 69, 1287 (1991).Google Scholar