Hostname: page-component-6bf8c574d5-mggfc Total loading time: 0 Render date: 2025-02-22T17:09:24.813Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Collision Cascade Damage in Ca2La8(SiO4)6O2 by Hrtem

Published online by Cambridge University Press:  16 February 2011

L.M. Wang  and
W.J. Webert
L.M. Wang
Affiliation:
Department of Earth and Planetary Sciences, University of New Mexico, Albuquerque, NM 87131
W.J. Webert
Affiliation:
Materials Science Department, Pacific Northwest Laboratory, Richland, WA 99352
Get access

Abstract

Ca2La8(SiO4)6O2 thin crystals become amorphous under ion beam irradiation. The ion dose required for complete amorphization of the thin crystal (critical amorphization dose, Dc) increased with the increasing irradiation temperature and decreased with ion mass at elevated temperatures. Samples irradiated with 1-1.5 MeV Ar+, Kr+ and Xe+ ions to doses much lower than Dc, in the temperature range from 20 to 498 K were used for a detailed HRTEM investigation to study the amorphization process. The residual collision cascade damage after irradiation appeared as nanometer scale amorphous domains. The images of these domains are extremely sensitive to the sample thickness. Small domains of cascade size were found only at the very thin edge of the sample. In thicker regions, amorphous domains appear after higher doses as the result of cascade overlap in projection. At higher temperatures, the observed amorphous domains are smaller indicating thermal recovery at the amorphous/crystalline interface. The amorphous domains are also larger in size after irradiation with ions of higher mass at a fixed ion dose. These results are consistent with the Dc-temperature curves determined by in situ TEM with the HVEM-Tandem Facility at Argonne National Laboratory. The width of the amorphous rim along the edge of the specimen grew with increasing ion dose suggesting that amorphization also proceeds from the sample surface. Images of the collision cascade damage were compared to the cascade sizes calculated with the TRIM code. Some digitally acquired HRTEM images of the cascade damage were processed to reveal more detailed information.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 373: Symposium Y – Microstructure of Irradiated Materials , 1994 , 389
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wang, L.M. and Ewing, R.C., MRS Bulletin XVII (5), 38 (1992).Google Scholar
2. Weber, W.J. and Wang, L.M., Nucl. Instr. and Meth. B91, 63 (1994).Google Scholar
3. Allen, C.W., Funk, L.L., Ryan, E.A. and Ockers, S.T., Nucl. Instr. and Meth. B40/41, 553 (1989).Google Scholar
4. Ziegler, J.F., Biersack, J.P. and Littmark, U., The Stopping and Range of Ions in Solids (Pergamon, New York, 1985).Google Scholar
5. O'Keefe, M.A. and Radmilovic, V. in Proceedings of the 13th International Congress on Electron Microscoèpy 1, edited by Jouffrey, B. and Colliex, C. (Les Editions de Physique, Paris, France, 1994) pp. 361–362.Google Scholar
6. Miller, M.L. and Ewing, R.C., Ultramicroscopy 48, 203 (1993).Google Scholar
7. Wang, L.M., Miller, M.L. and Ewing, R.C., Ultramicroscopy 51, 339 (1993).Google Scholar
8. Yoo, M.H. and Mansur, L.K., J. Nucl. Mater. 62, 282 (1976).Google Scholar
9. Sattler, M.L. and O'Keefe, M.A. in Proceeding-s of the 45th Annual Meeting of the Electron Microscopy Society of America, edited by Bailey, G.W. (San Francisco Press, CA, 1987).Google Scholar