Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T11:55:01.834Z Has data issue: false hasContentIssue false

Characterization of Dye-Sensitized Solar Cell with Different Nanoparticle sizes

Published online by Cambridge University Press:  18 August 2011

Aung Htun
Affiliation:
Arizona State University, Department of Engineering Technology, 6075 S. Williams Campus Loop, TECH Building, Mesa, AZ 85212, U.S.A.
Lakshmi V. Munukutla
Affiliation:
Arizona State University, Department of Engineering Technology, 6075 S. Williams Campus Loop, TECH Building, Mesa, AZ 85212, U.S.A.
Sailaja Radhakrishnan
Affiliation:
Arizona State University, Department of Engineering Technology, 6075 S. Williams Campus Loop, TECH Building, Mesa, AZ 85212, U.S.A.
Chih Y. Jen
Affiliation:
Arizona State University, Department of Engineering Technology, 6075 S. Williams Campus Loop, TECH Building, Mesa, AZ 85212, U.S.A.
Arunachalanadar M. Kannan
Affiliation:
Arizona State University, Department of Engineering Technology, 6075 S. Williams Campus Loop, TECH Building, Mesa, AZ 85212, U.S.A.
Karthik Kinhal
Affiliation:
Arizona State University, Department of Engineering Technology, 6075 S. Williams Campus Loop, TECH Building, Mesa, AZ 85212, U.S.A.
Get access

Abstract

The Dye-sensitized Solar Cell (DSSC) has been regarded as the next-generation solar cell because of its simple and low cost fabrication process. The experiments for optimizing the cell efficiency were carried out in this work include varying the TiO2 layer thickness on the working electrode and determining the most favorable nanoparticle size in the TiO2 paste. The TiO2 electrode or working electrode was fabricated using screen printing technique with the Coatema tool with thicknesses ranging from ~20 to 66 μm. It was observed that both open circuit voltage and short circuit current were found to have measurable dependence on the TiO2 layer thickness. The open circuit voltage changed from 0.77 to 0.82 V and correspondingly the short circuit current also varied from ~19 to 23 mA/cm2 depending on the TiO2 layer thickness. Additionally, the cell with 40 μm TiO2 thickness showed 9.06% photo conversion efficiency compared to 6.4% and 8.5% efficiency obtained for the cells with 20 μm and 66 μm TiO2 thicknesses respectively. The second part of the experiment was conducted using three different nanoparticle sizes of 13 nm, 20 nm and 37nm in the TiO2 layer to identify optimum nanoparticle size by maintaining the TiO2 film thickness at 40 μm. The cell with 20 nm size nanoparticle, in combination with 40 μm TiO2 thickness showed 11.2% efficiency that is in par or slightly better than the efficiency value reported for the DSSC in the literature as of now. The work described in this paper showed best possible values for the TiO2 layer thickness and nanoparticle size in the TiO2 for obtaining improved cell efficiency of 11.2%.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Grätzel, Michael, “Photoelectrochemical cells,” Nature, vol. 414, pp. 338344, 2001.Google Scholar
2. Grätzel, Michael, “Review Dye-sensitized solar cells”, Journal of Photochemistry and Photobiology C, Photochemistry Reviews 4 (2003) 145153.Google Scholar
3. Wang, Hsuan-Fu, Su, Wei-Nien, Hwang, Bing-Joe, “A novel architecture of poly(tetrafluoroethylene)-framed TiO2 electrodes for dye-sensitized solar cells”, Electrochemistry Communications Journal, 2009.Google Scholar
4. Solaronix Website, Products, Available: http://www.solaronix.com/products, (2010).Google Scholar
5. Ito, Seigo, Nazeeruddin, Mohammad K., Zakeeruddin, ShaikM., P´echy, Peter, Comte, Pascal, Gr¨atzel, Michael, TakakiMizuno, , Tanaka, Atsushi, and Koyanagi, Tsuguo, “Study of Dye-Sensitized Solar Cells by Scanning Electron Micrograph Observation and Thickness Optimization of Porous TiO2 Electrodes”, International Journal of Photoenergy, 2009.Google Scholar