Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-13T02:18:55.010Z Has data issue: false hasContentIssue false

Characterization of thermal interface resistance in thermoelectric generators

Published online by Cambridge University Press:  13 July 2011

C. Ramesh Koripella*
Affiliation:
Amerigon, 5462 Irwindale Ave., Irwindale, CA 91706 USA
Lon E. Bell
Affiliation:
Amerigon, 5462 Irwindale Ave., Irwindale, CA 91706 USA
Doug Crane
Affiliation:
Amerigon, 5462 Irwindale Ave., Irwindale, CA 91706 USA
Dazhi Wang
Affiliation:
Amerigon, 5462 Irwindale Ave., Irwindale, CA 91706 USA
*
*Corresponding author: rkoripella@amerigon.com
Get access

Abstract:

Thermoelectric generators are actively being pursued to recover waste heat from the auto exhaust gas to improve vehicle fuel economy. Efficiency of a thermoelectric generator is defined as the ratio of electrical power output to the heat input. In a typical thermoelectric generator, a heat exchanger captures the heat from the medium (ex: hot exhaust gas heat) and this heat needs to be transferred to the hot end of the thermoelectric elements with minimum losses. It is important to understand and minimize these thermal losses to improve the efficiency of a thermoelectric generator. Accurate measurement of the thermal interface resistance parameters is also important because they are used in a comprehensive thermoelectric system model to predict the performance of the generator under actual use conditions. To understand the factors influencing the thermal interface resistance, and to determine the effective thermal interface resistance between the heat exchanger and the thermoelectric hot shunts in a prototype generator that is currently being developed for auto exhaust heat recovery application, we have designed and built a test setup to characterize the thermal interface resistance under high heat flux conditions. Measured temperature profiles in the test sample, heat input into the test device and its geometry are fed into a thermal model to extract the thermal conductance parameters. Factors affecting the thermal interface resistance and the influence of different interface materials were evaluated. Suitable solutions with minimum thermal loss were selected for building the prototype thermoelectric generator for waste heat recovery application and validating the system model.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

1. Bell, L.E. and Crane, D.T.. Vehicle Waste Heat Recovery System Design and Characterization. in International Thermoelectric Conference. 2009. Freiburg, Germany.Google Scholar
2. Bell, L.E., LaGrandeur, J.W., and Crane, D.T.. Progress Report on Vehicular Waste Heat Recovery using a Cylindrical Thermoelectric Generator. in Thermoelectrics Goes Automotive. 2010. Berlin, Germany.Google Scholar
3. Angrist, S.W., 1982, Direct Energy Conversion, Allyn and Bacon, Inc, Boston: 4th Ed. p. 129-160 Google Scholar
4. Michael Yovanovich, M.., IEEE Transactions on Components and Packaging Technologies, vol. 28, No.2, 06 2005, p. 182206.Google Scholar
5. Cluham, J.R, Teertstra, P., Savija, I. and Yovanovich, M.M.., IEEE Inter Society Conference on Thermal Phenomena, 2002, p. 128135.Google Scholar