Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-10T11:19:37.186Z Has data issue: false hasContentIssue false
  • English
  • Français

Congruent Melting Temperatures of Si-As Alloys Measured During Pulsed-Laser Melting and Rapid Solidification

Published online by Cambridge University Press:  25 February 2011

J. A. Kittl ,
R. Reitano ,
M. J. Aziz ,
D. P. Brunco  and
M. O. Thompson
J. A. Kittl
Affiliation:
Division of Applied Sciences, Harvard University, Cambridge, MA 02138
R. Reitano
Affiliation:
Division of Applied Sciences, Harvard University, Cambridge, MA 02138
M. J. Aziz
Affiliation:
Division of Applied Sciences, Harvard University, Cambridge, MA 02138
D. P. Brunco
Affiliation:
Department of Materials Science, Cornell University, Ithaca, NY 14853
M. O. Thompson
Affiliation:
Department of Materials Science, Cornell University, Ithaca, NY 14853
Get access

Abstract

The solidification of Si-As alloys induced by pulsed laser melting was studied at regrowth velocities where the partition coefficient is close to unity. The congruent melting temperatures, TO, of Si-As alloys were determined using a temperature measurement technique developed for this work, and were confirmed with TOmeasurements using three other methods. The time-resolved temperature measurement uses a thin-film platinum thermistor, below and electrically isolated from the Si-As alloy layer, to directly measure the temperature during solidification. This, combined with measurements of transient conductance of the Si-As alloy, time-resolved reflectivity and Rutherford Backscattering Spectrometry, permitted the determination of the solid-liquid interface temperature, velocity and partition coefficient, the latent heat of fusion and TO for Si - 4.5 at. % As and Si - 9 at. % As alloys.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 279: Symposium A – Beam-Solid Interactions–Fundamentals and Applications , 1992 , 691
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Aziz, M. J. and Kaplan, T., Acta Metall. 36, 1335 (1988).CrossRefGoogle Scholar
[2] Kitti, J. A., Reitano, R., Aziz, M. J., Branco, D. P. and Thompson, M. O., to be published in J. Appl hys.Google Scholar
[3] Thompson, M. O., Mater. Res. Soc. Symp. Proc. 100, 525 (1988).CrossRefGoogle Scholar
[4] Peercy, P. S., Thompson, M. O. and Tsao, J. Y., Appl Phys. Lett 47, 244 (1985).CrossRefGoogle Scholar
[5] Baeri, P., Reitano, R., Malvezzi, A. M. and Borghesi, A., J. Appl Phys. 67, 1801 (1990).CrossRefGoogle Scholar
[6] Lee, K. R., West, J. A., Smith, P. M., Aziz, M. J. and Knapp, J. A., Mater. Res. Soc. Symp. Proc. 205, 301 (1992).CrossRefGoogle Scholar
[7] Auston, D. H., Surko, C. M., Venkatesan, T. N. C., Slusher, R. E. and Golovchenko, J. A., Appl Phys. Lett. 33, 437 (1978).CrossRefGoogle Scholar
[8] Thompson, M. O., Galvin, G. J., Mayer, J. W., Peercy, P. S., Hammond, R. B., Appl Phys. Lett. 42, 445 (1983).CrossRefGoogle Scholar
[9] Larson, B. C., Tischler, J. Z. and Mills, D. M., J. Mater. Res. 1, 144 (1986).CrossRefGoogle Scholar
[10] Thompson, M. O., Bucksbaum, P. H. and Bokor, J., Mater. Res. Soc. Symp. Proc. 35, 181 (1985).CrossRefGoogle Scholar
[11] Kittl, J. A. and Aziz, M. J., unpublished.Google Scholar