Hostname: page-component-745bb68f8f-lrblm Total loading time: 0 Render date: 2025-01-28T14:16:03.189Z Has data issue: false hasContentIssue false
  • English
  • Français

Corrosion Protection of Materials by Applying Nanotechnology Associated Studies

Published online by Cambridge University Press:  01 February 2011

Ramazan Asmatulu  and
Richard O. Claus
Ramazan Asmatulu
Affiliation:
Fiber & Electro Optics Research Center, Bradley Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, VA 24061
Richard O. Claus
Affiliation:
Fiber & Electro Optics Research Center, Bradley Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, VA 24061
Get access

Abstract

Corrosion usually takes place and degrades material surfaces based on environmental chemistry. There are several popular ways of decreasing corrosion rates to improve the lifetime of materials and devices. As recently determined, some methods may incorporate nanostructured materials processing approaches. These include surface treatment methods, nanocomposite thin film coatings, top layer coatings and thermal barrier coatings. Test results show that the corrosion performance of materials is significantly improved as compared to materials processed using conventional methods. In the present paper, some of these studies will be analyzed, and the obtained corrosion results will be evaluated in detail for the future of corrosion processes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 788: Symposium L – Continuous Nanophase and Nanostructured Materials , 2003 , L11.44
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Asmatulu, R., Claus, R.O. and Tuzcu, I. “Adhesion Failures of Thin Film Coatings by Internal and External Stresses at Interfaces,” Proceedings of the 5th International Congress on Thermal Stresses and Related Topics, TS2003, 8–11 June 2003, MA–6.Google Scholar
2. Teixeira, V., Thin Solid Films 392 (2001) 276–281.Google Scholar
3. Callister, W.D. Jr “Materials Science and Engineering, An Introduction – Fifth Edition” John Wiley and Son Inc., New York, 2000.Google Scholar
4. Adamson, A.W. and Gast, A.P. “Physical Chemistry of Surfaces–6th Addition”, John Wiley and Son, Inc., 1997.Google Scholar
5. http://www.corrosion-doctors.org/ Google Scholar
6. http://www.corrosioncost.com/home.html Google Scholar
7. http://www.stormvision.net/index.cfm/act/articles/cat_ID/3 Google Scholar
8. http://www.sachtleben.de/m/pdf/pdf0383d-4.pdf Google Scholar
9. Roberge, P.R. “Handbook of Corrosion Engineering”, McGraw-Hill, New York, 2000.Google Scholar
10. http://www.sachtleben.de/m/pdf/pdf0383d-4.pdf Google Scholar
11. Yeh, J.M., Chen, C.L., Chen, Y.C., Ma, C.Y., Lee, K.R., Wei, Y. and Li, S., Polymer 43(2002), 2729–2736.Google Scholar
12. Chen, C., Khobaib, M. and Curliss, D., Progress in Organic Coating, 2003 (article in press).Google Scholar
13. Tsai, P.C. and Hus, C.S., Surface and Coating Technology, 2003 (article in press).Google Scholar
14. Erler, F., Jakob, C., Romanus, H., Spiess, L., Wielage, B., Lampke, T. and Steinhauser, S., Electrochemica Acta, 48(2003) 3063–3070.Google Scholar
15. Zeng, A., Liu, E., Annergren, I.F., Tan, S.N., Zhang, S., Hing, P. and Gao, J., Diamond and Related Materials, 11(2002) 160–168.Google Scholar
16. Fedrizzi, L., Rodriguez, F.J., Rossi, S., Deflorin, F. and Maggion, R.D., Electrochimica Acta 46 (2001) 3715–3724.Google Scholar
17. Zhang, W., Hurly, B., Buchheit, R.G., Journal of Electrochemical Society, 149(8) B357–B365 (2002)Google Scholar
18. Maximovitch, , Barrel, S., Le, G., Cras, F. and Claudet, F., Materials Science Forum, Vols. 192–194 (1995) 111–120.Google Scholar
19. Choi, Y.S. and Kim, J.G., Materials Science and Engineering, A333 (2002) 336–342.Google Scholar
20. http://www.unifi.it/unifi/surfchem/solid/bardi/tbcs/tbcstripping/tbcstripping.html Google Scholar
21. Fedrizzi, L., Deflorain, F., Rossi, S., Fambri, L. and Bonora, P.L., Progress in Organic Coating, 42(2001) 65–74.Google Scholar
22. Yang, W.J., Choa, Y.H., Sekino, T., Shim, K.B., Niihara, K. and Auh, K.H., Thin Solid Films, 434(2003) 49–54.Google Scholar
23. Unpublished corrosion data, Virginia Tech. 2003.Google Scholar
24. http://www.mc-bridge-coatings.com/fluorinated_polyurethanes.htm Google Scholar
25. Erdemir, A., Mat. Res. Soc. Symp. Proc. Vol. 697, 2002, P9.1.1–P9.1.13.Google Scholar
26. http://www.farwst.com/fwst/anodimpr/anot02.htm; http://www.korozja.pl/62_01_03.pdf Google Scholar
27. Kim, S.H., Aust, K.T., Erb, U., Gonzales, F. and Palumbo, G., Scripta Material, 48(2003) 1379–1384.Google Scholar
28. Choi, H.W., Kim, K.H., Han, S.H. and Kim, H.J., IEEE Transactions on Magnetics, Vol. 37, No: 4, 2001, 1773–1775.Google Scholar
29. Ye, H., Sun, C.Q. and Hing, P., J. Phys. D: Appl. Phys. 33(2000)L148–L152.Google Scholar
30. Fan, X., Advincula, R.C., Mat. Res. Soc. Symp. Proc. Vol. 697, 2002, P8.16.1–P8.16.6.Google Scholar
31. http://www.microphotonics.com/ Google Scholar
32. Dillard, D.A., Scott, C., Mount, K., Xu, D., Wan, K.K., West, R., Dillard, J.G. “Experimental Evaluation of the Probe Test for Measuring Thin Film Adhesion,” Proceedings of ASME International Mechanical Engineering Congress: Washington, DC, 15–21 November, 2003.Google Scholar
33. http://www.hysitron.com/PDF/0920–001%20Tribo%20coatings%20on%20steel.pdf Google Scholar
34. http://www.hp.com/ Google Scholar