Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-28T20:14:21.079Z Has data issue: false hasContentIssue false
  • English
  • Français

Corrosion Resistance of Surface treated Alloy 617 in High Temperature HI and H2SO4 Environments

Published online by Cambridge University Press:  14 January 2013

Donghoon Kim ,
Injin Sah ,
Jin Young Choi ,
Young Soo Kim ,
Hee Cheon No  and
Changheui Jang
Donghoon Kim
Affiliation:
Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea.
Injin Sah
Affiliation:
Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea.
Jin Young Choi
Affiliation:
Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea.
Young Soo Kim
Affiliation:
Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea.
Hee Cheon No
Affiliation:
Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea.
Changheui Jang
Affiliation:
Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea.
Get access

Abstract

The sulfur-iodine thermo-chemical cycle (S-I cycle) is one of the promising nuclear hydrogen production methods combined with a high temperature gas-cooled reactor. However, extremely corrosive environments limit the selection of structural materials. Therefore, in this study, corrosion behaviors of several metallic materials were investigated to screen the candidate metallic materials. Coupon type specimens were exposed for 100 h in simulated SO3 and HI decomposer conditions at 850 °C. After 100 h exposure, the surface treated Alloy 617 showed the superior weight change in both environments. However, scanning electron microscope observation showed oxide spallation for EB-treated and NiAl coated Alloy 617. On the other hand, the Ni3Al coated Alloy 617 showed better corrosion resistance in SO3 decomposer condition, such that only formed external Al-rich oxide layer. Especially, in a HI decomposer condition, the damage on the Ni3Al coated Alloy 617 was considerably less significant probably due to the protection by very thin aluminum-rich oxide on the surface.

Keywords

corrosioncoatingAl
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1519: Symposium MM – Materials under Extreme Environments , 2013 , mrsf12-1519-mm10-07
Copyright
Copyright © Materials Research Society 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Brown, L.C., Besenbruch, G.E., Lentsch, R.D., Schultz, K.R., Funk, J.F, Pickard, P.S., Marshall, A.C., and Showalter, S.K., GA–A24285 Rev. 1 (2003).Google Scholar
Kim, D., Koo, J., Sah, I. and, Jang, C., High Temperature Oxidation Characteristics of Surface Treated Alloy 617 by Al Sputtering and Inter-Diffusion Heat Treatment, (Proc. ICAPP 2011, Nice, France, 2011) pp. 289–294.Google Scholar
Sah, I., Kim, D., Koo, J. and Jang, C., Electron Beam Induced Surface Modification of Ni-base Superalloy for PCHE Type Intermediate Heat Exchanger, (Proc. ICMR 2011, Pusan, Korea, 2011).Google Scholar
Kim, H.P., Kim, D.J., Kwon, H.C., Park, J.Y., and Kim, Y.W., J. Engineering Gas Turbines and Power 131 042904 (2009).10.1115/1.3095808CrossRefGoogle Scholar
Brumm, M.W., Grabke, H.J., Corr. Sci. 33 1677 (1992).10.1016/0010-938X(92)90002-KCrossRefGoogle Scholar
Kim, D., Sah, I., Lee, H., and Jang, C., J. Surf. Coat. Tech. (in progress). Google Scholar