Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-14T23:39:27.500Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of CuO on Microstructure and Microwave Dielectric Properties of CaTiO3-Ca(Zn1/3Nb2/3)O3 Ceramics System

Published online by Cambridge University Press:  26 February 2011

Hongtao Yu ,
Hua Hao ,
Hanxing Liu  and
Zhongqing Tian
Hongtao Yu
Affiliation:
yuhongtao2001@163.com, Wuhan University of Technology, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Luoshi Road 122#, Wuhan, 430070, China, People's Republic of, 86-27-87864681, 86-27-87651779
Hua Hao
Affiliation:
haohuayang@163.com, Wuhan University of Technology, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan, 430070, China, People's Republic of
Hanxing Liu
Affiliation:
lhxhp@mail.whut.edu.cn, Wuhan University of Technology, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan, 430070, China, People's Republic of
Zhongqing Tian
Affiliation:
tzqmail@cqit.edu.cn, Chongqing Institute of Technology, Chongqing, 400050, China, People's Republic of
Get access

Abstract

The effect of CuO on the microstructure and microwave dielectric properties of the CaTiO3-Ca(Zn1/3Nb2/3)O3 ceramics prepared by the conventional solid-method has been investigated. Doped with the 0.5∼1.25wt% CuO powder, the system of which the sintering temperatures were lowered exhibited the orthorhombic perovskite. It can effectively promote the microwave dielectric properties of the 0.3CaTiO3-0.7Ca(Zn1/3Nb2/3)O3 system at lower sintering temperature at the level of 1.0wt% CuO additive. The quality factor increases from 10860 to 13900GHz and not any significant change was observed in the TCF value with fixed CuO additive at different sintering temperature.

Keywords

ceramicdielectric propertiesmorphology
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 966: Symposium T – Ferroelectrics and Multiferroics , 2006 , 0966-T10-06
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Lee, Y.C., Liang, M.H., Hu, C.T. and Lin, I.N., J. Euro. Ceram. Soc., 21, 2755–2758 (2001)Google Scholar
2. Yoon, K.H. and Kim, E.S., Mater. Res. Bull., 30, 813–820 (1995)Google Scholar
3. Hsu, C.S., Huang, C.L., Mater. Res. Bull., 36, 1939–1947 (2001)Google Scholar
4. Fukui, T., Sadrai, C., et al, J. Mater. Res.,31(7), 817–825 (1996)Google Scholar
5. Komarnenl, S., Abothu, I.R. and Rao, A.V.P., J. Sol-Gel Sci. and Tech., 15, 263–270 (1999)Google Scholar
6. Yang, Q.H., Kim, E.S., Kim, Y.J, et al., Mater. Chem. And Phys., 79, 236–238 (2003)Google Scholar
7. Huang, C.L., Weng, M.H., Mater. Res. Bull., 36, 2714–2750 (2001)Google Scholar
8. Ha, J.Y., Choi, J.W., Kim, H.J., Yoon, S.J. and Yoon, K.H., Mater. Chem. And Phys., 71, 17–22 (2001)Google Scholar
9. Liu, H.X., Yu, H.T., Tian, Z.Q., Meng, Z.H., Wu, W.Z. and Ouyang, S.X., J. Am. Ceram. Soc., 88(2), 453–455(2005)Google Scholar
10. Kagata, H. and Kato, J., Jpn. J. Appl. Phys., 33, 5463–5465 (1994)Google Scholar