Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-10T08:29:24.096Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Oxide Layers on Gas-Generating Hydride Particles During Production of Aluminium Foams

Published online by Cambridge University Press:  10 February 2011

V. Gergely  and
T. W. Clyne
V. Gergely
Affiliation:
Dept. of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge, CB2 3QZ, UK, twclO@cam.ac.uk
T. W. Clyne
Affiliation:
Dept. of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge, CB2 3QZ, UK, twclO@cam.ac.uk
Get access

Abstract

Melt routes to metallic foam production offer attractions of low cost and the potential for good microstructural control. In situ gas generation may be preferable to external gas injection in terms of the important objective of generating a fine and uniform cell structure. The main difficulty with this approach has been that of ensuring that the gas-generating powder is suitably dispersed throughout the melt before the gas is released and the cells are formed.

In the present paper, procedures are outlined for preparation of powders for use in aluminium melts, where gas will be released only after a suitable delay, allowing the powders to first become well-dispersed in the melt and solidification to start. Pre-treatment of the foaming agent also facilitates a flexible production of castings with various porosity at the same processing conditions simply by varying the thickness of a diffusion barrier layer on the gas-releasing agent. The role of the melt viscosity history, as a function of a heat extraction rate from the solidifying melt and an alloy composition, on the final porosity of the castings is also briefly discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 521: Symposium R – Porous & Cellular Materials for Structural Applications , 1998 , 139
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Clyne, T. W., Chandra, L., Internal Report, University Cambridge, 1996.Google Scholar
2. Lavrenko, V. A., Shemet, V. Zh., Petrov, L. A., Teplov, O. A., Dolukhanyan, S. K., Oxidation Metals 33, 177 (1990).Google Scholar
3. Gergely, V., CPGS thesis, University of Cambridge, 1997.Google Scholar
4. Fukuzuka, T., Shimogori, K., Satoh, H., Kamikubo, F. in Titanium ‘80, edited by Kimura, H. and Izumi, O. (Proc. 4th Int. Conf. on Titanium, Kyoto, Japan, 1980), pp. 2783–2792.Google Scholar
5. Bikerman, J. J., Foams (Springer-Verlag, New York, 1973), p. 337.Google Scholar
6. Joly, P. A., Mehrabian, R., J.Mat.Sci. 11, 1393 (1976).Google Scholar
7. Thomas, D. G., J. Colloid Sci. 20, 267 (1965).Google Scholar
8. Clyne, T. W., Metal Sci. 16, 441 (1982).Google Scholar