Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-29T14:33:25.619Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical Through-Hole and Planar Interconnect Generation in Roll-to-Roll LED Lighting Manufacturing using Industrial Inkjet Printheads

Published online by Cambridge University Press:  11 August 2011

Ingo Reinhold ,
Moritz Thielen ,
Wolfgang Voit ,
Werner Zapka ,
Reiner Götzen  and
Helge Bohlmann
Ingo Reinhold
Affiliation:
XaarJet AB, Elektronikhöjden 10, 17526 Järfälla, SE. KTH Royal Institute of Technology, SE-100 44 Stockholm, SE.
Moritz Thielen
Affiliation:
XaarJet AB, Elektronikhöjden 10, 17526 Järfälla, SE.
Wolfgang Voit
Affiliation:
XaarJet AB, Elektronikhöjden 10, 17526 Järfälla, SE. KTH Royal Institute of Technology, SE-100 44 Stockholm, SE.
Werner Zapka
Affiliation:
XaarJet AB, Elektronikhöjden 10, 17526 Järfälla, SE. KTH Royal Institute of Technology, SE-100 44 Stockholm, SE.
Reiner Götzen
Affiliation:
microTEC Gesellschaft für Mikrotechnologie mbH, Bismarckstrasse 142, 47057 Duisburg, DE.
Helge Bohlmann
Affiliation:
microTEC Gesellschaft für Mikrotechnologie mbH, Bismarckstrasse 142, 47057 Duisburg, DE.
Get access

Abstract

Despite the availability of many high-volume and low-cost manufacturing processes for LED-based lighting applications, relying mainly on fixed patterns such as LED-backlights and RGB-pixelated displays, novel applications, such as “mood lighting” or interior wall displays call for more complicated and shaped LED arrangements. The presented work is based of a novel roll-to-roll (R2R) process to adaptively and cost-efficiently generate LED arrangements on RMPD® substrates.

Inkjet printing of planar and though-hole electrical interconnections is of high importance to the process, as it provides a fully digital way of interconnecting devices electrically, accounting for the actual position of the component and spatially provide different ink film thicknesses.

Xaar’s industrial inkjet printheads are used to dispense defined volumes of 50 pL of a silver nanoparticle ink in order to provide high reliability and good positioning accuracy while main-taining low satellite drop densities. Specific printing strategies are investigated at a print speed of 0.1 m/s to allow for a reliable electrical connection in case of up to 50 μm deep via connections to the buried component.

Due to the low glass-transition nature of the underlying substrates, low sintering tempera-tures are required to preserve the mechanical properties of the substrate. Low temperature oven sintering yielding sufficient conductivity to drive a current of 40 mA will be discussed.

Keywords

ink-jet printingAgsintering
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1340: Symposium T – High-Speed and Large-Area Printing of Micro/Nanostructures and Devices , 2011 , mrss11-1340-t03-06
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. www.light-rolls.eu, last accessed: April 2011.Google Scholar
2. Osch, T. H. J. v., Perelaer, J., de Laat, A.W. M., Schubert, U. S., Advanced Materials 20 (2008).Google Scholar
3. Hendriks, C. E., Smith, P. J., Perelaer, J., Berg, A. M. J. v. d., Schubert, U. S., Advanced Functional Materials 18 (2008).Google Scholar
4. Voit, W., Zapka, W., Menzel, A., Mezger, F., (Proc. Digital Fabrication Conference 24, Pittsburgh, PA, 2008), 678–683.Google Scholar
5. Bollström, R., Määttänen, A., Tobjörk, D., Ihalainen, P., Kaihovirta, N., Österbacka, R., Peltonen, J., and Toivakka, M., Organic Electronics 10 (2010).Google Scholar
6. Perelaer, J., Klokkenburg, M. and Schubert, U. S., EU Patent 2009/08675, 2009.Google Scholar
7. Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., Schubert, U. S., Journal of Materials Chemistry 19 (2009).Google Scholar
8. Allen, M. L., Aronniemi, M., Mattila, T., Alastalo, A., Ojanperä, K., Suhonen, M. and Seppä, H., Nanotechnology 19 (2008).Google Scholar
9. West, J., Carter, M., Smith, S. and Sears, J., NSTI-Nanotech 2 (2010).Google Scholar
10. Zapka, W., Voit, W., Loderer, C., and Lang, P., (Proc. Digital Fabrication Conference 24, Pittsburgh, PA, 2008), 906–911.Google Scholar