Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-10T08:43:43.183Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental Characterization and Modeling of InP-based Microcoolers

Published online by Cambridge University Press:  01 February 2011

Rajeev Singh ,
Daryoosh Vashaee ,
Yan Zhang ,
Million Negassi ,
Ali Shakouri ,
Yae Okuno ,
Gehong Zeng ,
Chris LaBounty  and
John Bowers
Rajeev Singh
Affiliation:
Jack Baskin School of Engineering, University of California, Santa Cruz, CA, 95064
Daryoosh Vashaee
Affiliation:
Jack Baskin School of Engineering, University of California, Santa Cruz, CA, 95064
Yan Zhang
Affiliation:
Jack Baskin School of Engineering, University of California, Santa Cruz, CA, 95064
Million Negassi
Affiliation:
Jack Baskin School of Engineering, University of California, Santa Cruz, CA, 95064
Ali Shakouri
Affiliation:
Jack Baskin School of Engineering, University of California, Santa Cruz, CA, 95064
Yae Okuno
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA, 93106
Gehong Zeng
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA, 93106
Chris LaBounty
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA, 93106
John Bowers
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA, 93106
Get access

Abstract

We present experimental and theoretical characterization of InP-based heterostructure integrated thermionic (HIT) coolers. In particular, the effect of doping on overall device performance is characterized. Several thin-film cooler devices have been fabricated and analyzed. The coolers consist of a 1μm thick superlattice structure composed of 25 periods of InGaAs well and InGaAsP (λgap ≈ 1.3μm) barrier layers 10 and 30nm thick, respectively. The superlattice is surrounded by highly-doped InGaAs layers that serve as the cathode and anode. All layers are lattice-matched to the n-type InP substrate. N-type doping of the well layers varies from 1.5×1018cm−3 to 8×1018cm−3 between devices, while the barrier layers are undoped. Device cooling performance was measured at room-temperature. Device current-versus-voltage relationships were measured from 45K to room-temperature. Detailed models of electron transport in superlattice structures were used to simulate device performance. Experimental results indicate that low-temperature electron transport is a strong function of well layer doping and that maximum cooling will decrease as this doping is increased. Theoretical models of both I-V curves and maximum cooling agree well with experimental results. The findings indicate that low-temperature electron transport is useful to characterize potential barriers and energy filtering in HIT coolers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 793: Symposium S – Thermoelectric Materials 2003 - Research and Applications , 2003 , S11.4
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Rushing, L., Shakouri, A., Abraham, P., and Bowers, J., “Micro Thermoelectric Coolers for Integrated Applications”, 16th International Conference on Thermoelectrics, 1997, pp. 646–649.Google Scholar
2. Shakouri, A. and Bowers, J., “Heterostructure Integrated Thermionic Refrigeration”, 16th International Conference on Thermoelectrics, 1997, pp. 636–640.Google Scholar
3. Shakouri, A. and Bowers, J., Appl. Phys. Lett. 71 (9) 1234 (1997).Google Scholar
4. Mahan, G.D. and Woods, L.M., Phys. Rev. Lett. 80, 4016 (1998).Google Scholar
5. Zeng, T. and Chen, G., “Energy Conversion in Heterostructures for Thermionic Cooling”, Microscale Thermophysical Engineering, 4, pp. 39–50.Google Scholar
6. Shakouri, A., LaBounty, C., Abraham, P., Piprek, J., and Bowers, J., “InP-based Thermionic Coolers”, 11th International Conference on Indium Phosphide and Related Materials, 1999, pp. 463–465.Google Scholar
7. Shakouri, A., LaBounty, C., Abraham, P., Piprek, J., and Bowers, J.E., “Enhanced Thermionic Emission Cooling in High Barrier Superlattice Heterostructures”, Mat. Res. Soc. Symp. Proc. 545, 1999, pp. 449–458.Google Scholar
8. Vashaee, D. and Shakouri, A., “Improved Thermoelectric Power Factor in Metallic-based Superlattices”, submitted for publication in Physical Review Letters, 2003.Google Scholar
9. Vashaee, D. and Shakouri, A., “Modeling and Optimization of Single-element Bulk SiGe Thin-film Coolers”, submitted for publication in Microscale Thermophysical Engineering, 2003.Google Scholar
10. Vashaee, D. and Shakouri, A., “Electronic and Thermoelectric Transport in Semiconductor and Metallic Superlattices”, tentatively scheduled for publication in Journal of Applied Physics on February 2004.Google Scholar