Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-11T11:43:32.294Z Has data issue: false hasContentIssue false
  • English
  • Français

Firing of a Pulse and its Control Using a Novel Floating Electrode Bi-Resistive Device

Published online by Cambridge University Press:  21 May 2012

Y. Kang ,
M. Verma ,
T. Liu  and
M. Orlowski
Y. Kang
Affiliation:
Bradley Department of Electrical and Computer Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 USA
M. Verma
Affiliation:
Bradley Department of Electrical and Computer Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 USA
T. Liu
Affiliation:
Bradley Department of Electrical and Computer Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 USA
M. Orlowski
Affiliation:
Bradley Department of Electrical and Computer Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 USA
Get access

Abstract

A novel resistive device with a floating electrode (RFED) has been manufactured as a stack of layers Cu/TaOx/Pt/TaOx/Cu in a crossbar array comprising two single resistive switches merged antiserially at the common inert Pt floating electrode. The device exhibits four states HRS/HRS, HRS/LRS, LRS/HRS and LRS/LRS, where HRS and LRS are the high and low resistance states, respectively, with only LRS/LRS being fully conductive. When the voltage on one Cu electrode is increased to a value Vth-on(A), a conductive nanofilament (CF) in switch A is formed, while suppressing CF formation in switch B. When the voltage is then extended to negative bias, a sudden jump in the I-V characteristics is observed at Vth-on(B), when the 2nd CF in switch B is formed rendering the RFED device fully conductive. If the current surge just after the formation of CF in 2nd switch exceeds the reset current of the 1st CF, the 1st CF ruptures shortly thereafter, i.e. the conductive state is destroyed as soon as it has been created. This property proves valuable for applications in neural networks where a generation of a current pulse at a critical threshold is required. The height and the time width of the firing pulse is an inherent property of the device and can be controlled by the parameters of the individual switches and their set/reset operations.

Keywords

memoryfiringoxide
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1430: Symposium E – Materials and Physics of Emerging Nonvolatile Memories , 2012 , mrss12-1430-e08-08
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Banno, N., Sakamoto, T., Iguchi, N., Kawaura, H., Kaeriyama, S., Mizuno, M., Terabe, K., Hasegawa, T., Aono, M., “ Solid-Electrolyte Nanometer Switch”, IEICE Trans. Electron., vol. 869, p. 1492–98 (2006)Google Scholar
2. Sawa, A., “Resistive Switching in transition metal oxides”, Materials Today, vol. 11, p.28–36 (2008)Google Scholar
3. Valov, I., et al. “Electrochemical metallization memories - fundamentals, applications, prospects”, Nanotechnology 22(25) pp. 4003–25 (2011)Google Scholar
4. Waser, R., Valov, I., “Electrochemical Reactions in Nanoionics – Towards Future Resistive Switching Memories”, ECS Transactions, 25(6) 431–437 (2009)Google Scholar
5. Liu, T., Kang, Y., Verma, M., “Anti-Parallel Circuit of Resistive Cu/TaOx/Pt Switches”, paper accepted to this conference Google Scholar
6. Linn, E., Rosezin, R., Kugeler, C., Waser, R., “ Complementary resistive switches for passive nancrossbar memories” Nature Materials Letters, vol. 9, p. 403–406 (2010)Google Scholar
7. Kang, Y., Liu, T., Verma, M., Orlowski, M., “Program and erase operation of a floating electrode bi-resistive device using compliance current constraint,” IEEE Trans. Electron Devices, submitted for publication.Google Scholar
8. Gerstner, W. and Kistler, W. M., Spiking Neuron Models. Cambridge, U.K.: Cambridge Univ. Press, 2002 Google Scholar