Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-13T02:44:22.116Z Has data issue: false hasContentIssue false

Formation of Nano-Sized Crystals During Plastic Deformation in Amorphous Alloys

Published online by Cambridge University Press:  14 March 2011

A. Ogura
Affiliation:
Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan, aogura@pi.titech.ac.jp
M. Sato
Affiliation:
Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
R. Tarumi
Affiliation:
Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
M. Shimojo
Affiliation:
Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
K. Takashima
Affiliation:
Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
Y. Higo
Affiliation:
Precision and Intelligence Laboratory, Tokyo Institute of Technology 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan
Get access

Abstract

Microstructural change in deformation bands was observed in a Ni-P amorphous alloy using transmission electron microscopy (TEM). Bending strain was applied to a micro-sized cantilever beam specimen. A TEM specimen was prepared from the micro-sized specimen with keeping the information on the relationship between the deformed direction and the specimen orientation. TEM observation in deformation bands revealed that plastic deformation induces the precipitation of nanocrystalline Ni particles. An orientation relationship between deformation direction and crystal orientation was obtained, that is, a (111) plane of all crystalline particles are parallel to the side surface of the specimen.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFFENCES

1. Masumoto, A. and Madding, R., Acta metall., 19, 725 (1971 Google Scholar
2. Pampillo, C. A. and Chen, H. S., Mater. Sci. Eng., 13, 181, 1974)Google Scholar
3. Thorpe, S. J., Ramaswami, B. and Aust, K. T., Acta Metall. 36, 795, 1988)Google Scholar
4. Trudeau, M. L., Dussault, D., Neste, A. Van and Schulz, R., Phys. Rev. Lett. 64, (99) 1990 Google Scholar
5. He, Y., Shiflet, G. J. and Poon, S. J., Acta metall., 43, 83). 1995 Google Scholar
6. Chen, H., He, Y., Shiflet, G. J. and Poon, S. J., Nature, 367, 541, 1994)Google Scholar
7. Spaepen, F., Acta metall., 25, 407, 1977)Google Scholar
8. Takashima, K., Kimura, T., Shimojo, M., Higo, Y., Sugiura, S. and Swain, M. V., Proc. 7th Int. Fatigue Cong. (Higher Education Press, Cradley Health. UK.) 1871 (1999)Google Scholar
9. Tarumi, R., Ogura, A., Shimojo, M., K, Takashima and Higo, Y.. Jpn. J. Appl. Phys., 39, L611, 2000)Google Scholar
10. Sui, M. L., Lu, K. and He, Y. Z., Phil. Mag B., 63, 993, 1991)Google Scholar
11. Ogura, A., Ichikawa, Y., Shimojo, M., Takashima, K., Higo, Y. and Swain, M. V., Proc. 3rd Int. Conf. Poster Exhibition on MicroMaterials (MicroMat 2000), 574, 2000)Google Scholar