Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-01-15T11:11:43.133Z Has data issue: false hasContentIssue false
  • English
  • Français

Fracture During High Temperature Deformation of A Ti-44A1-3V-7.5v/o TiB2 XD™ Composite

Published online by Cambridge University Press:  01 January 1992

D. Zhao ,
J. J. Valencia ,
K. G. Anand  and
S. J. Wolff
D. Zhao
Affiliation:
Concurrent Technologies Corporation, 1450 Scalp Avenue, Johnstown, PA 15904, U.S.A.
J. J. Valencia
Affiliation:
Concurrent Technologies Corporation, 1450 Scalp Avenue, Johnstown, PA 15904, U.S.A.
K. G. Anand
Affiliation:
Concurrent Technologies Corporation, 1450 Scalp Avenue, Johnstown, PA 15904, U.S.A.
S. J. Wolff
Affiliation:
Concurrent Technologies Corporation, 1450 Scalp Avenue, Johnstown, PA 15904, U.S.A.
Get access

Abstract

High temperature compression workability tests have been performed on a Ti-44a/oA1-3a/oV- 7.5v/oTiB2 XD™ composite over a range of temperatures (1273 to 1473 K), strain rates (10−3 to 10 s−1), and interrupted strains. Three types of specimen configurations were used in the tests. Fracture caused by secondary tensile stress at the surface of the specimens was investigated in terms of crack initiation and propagation. The fractured specimens were analyzed using both optical and SEM microscopy. Cracks started at the equator of the specimens and propagated into the specimens through their longitudinal axis. The fracture mode varied with temperature and strain rate. At the lowest temperature (1273 K) and the lower strain rate (0.1 s−1), the fracture was transgranular with a crack arrester type. At the lowest and intermediate temperatures (1273 and 1373 K) and the highest strain rate (10 s−1), intergranular cracks were observed. At the highest temperature (1473 K) and the highest strain rate (10 s−1), transgranular failures with delamination and crack divider types were observed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 1069
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Saqib, M., Weiss, I., Mehrotra, G.M., Clevenger, E., Jackson, A.G., and Lipsitt, H.A., Met.. Trans. A, 22A, 1721 (1991).Google Scholar
2. Kampe, S.L., Bryant, J.D., and Christodoulou, L., Met. Trans. A, 22A. 447 (1991).Google Scholar
3. Larsen, D.E., Adams, M.L., Kampe, S.L., Scripta Met. et Mater., 24, 851 (1990).Google Scholar
4. Bryant, J.D., Adams, M.L., Barrett, A.R.H., Clarke, J.A., Gaskin, G.B., Christodoulou, L., and Brupbacher, J., NASP Contractor Report 1095, Martin Marietta Laboratories, (1990).Google Scholar
5. Larsen, D. E., in Microstructure/Property Relationships in Titanium Aluminides and Allovs. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), p. 345.Google Scholar
6. Pao, P. S., Pattnaik, A., Gill, S. J., Michel, D. J., Feng, C. R., and Crowe, C. R., Scripta Met. et Mater., 24, 1895 (1990).Google Scholar
7. Kim, Y-W., in Microstructure/Property Relationships in Titanium Aluminides and Alloys. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), 91.Google Scholar
8. Huang, S-C. and Shih, D. S., in Microstructure/Property Relationships in Titanium Aluminides and Alloys. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), p. 105.Google Scholar
9. Dowling, W. E. Jr., Worth, B. D., Allison, J. E., and Jones, J. W., Huang, S-C. and Shih, D. S., in Microstructure/Property Relationships in Titanium Aluminides and Alloys. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), p. 123.Google Scholar
10. Shih, D. S., Huang, S-C., Scarr, G. K., and Chesnut, J. C., Huang, S-C. and Shih, D. S., in Microstructure/Property Relationships in Titanium Aluminides and Alloys. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), p. 135.Google Scholar
ll. Krishamurthy, S. and Kim, Y-W., Huang, S-C. and Shih, D. S., in Microstructure/Property Relationships in Titanium Aluminides and Alloys. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), p. 149.Google Scholar
12. Chan, K. S. and Kim, Y-W., Huang, S-C. and Shih, D. S., in Microstructure/Property Relationships in Titanium Aluminides and Alloys. edited by Kim, Y-W. and Boyer, R. R., (TMS, Warrendale, PA, 1990), p. 179.Google Scholar
13. Christodoulou, L., Parish, P. A., and Crowe, C. R., in High Temperature. High Performance Composites, edited by Lemkey, S. D. et al (Mater. Res. Soc. Proc. 120. Pittsburgh, PA, 1988), p. 29.Google Scholar
14. Anand, K. G., Zhao, D., Valencia, J. J., and Wolff, S. J., in Application of Mechanics and Material Models to Design and Processing III, edited by Russell, E.S., (TMS, Warrendale, PA, 1992).Google Scholar
15. Zhao, D., Anand, K. G., Valencia, J. J., and Wolff, S. J., in Intermetallic Matrix Composites II, edited by Miracle, D. B., Graves, J. A., and Anton, D. L., (MRS, Pittsburgh, PA, 1992).Google Scholar
16. Popoola, D. et al, in Interfaces in Metal-Ceramic Composites, ed. Lin, R. Y. et al, (TMS, Warrendale, PA, 1989) p. 465.Google Scholar
17. Yamaguchi, M. and Umakoshi, Y., Progress in Materials Science, 34, 1 (1990).Google Scholar
18. Chaudhury, P. K., Long, M. and Rack, H. J., Materials Science and Engineering, A152, 37 (1992).Google Scholar
19. Chaudhury, P. K. and Rack, H. J., Scripta Met. et Mater., 26, 691 (1992).Google Scholar