No CrossRef data available.
Published online by Cambridge University Press: 22 February 2011
The wide bandgap semiconductor ZnSe has been nucleated on epitaxial (In,Ga)P buffer layers (on GaAs substrates) having various In compositions, and hence various lattice constants. The III-V ternary alloy offers a wide range of lattice constants for the heteroepitaxy of a multitude of potential II-VI light emitting devices, such as blue pn injection lasers composed of the (Zn,Mg)(S,Se) material system. Since the II-VI and III-V layers are grown using gas source molecular beam epitaxy in separate dedicated reactors, the technique of amorphous As deposition is employed to passivate the (In,Ga)P surface prior to the ex situ transfer. High resolution double crystal x-ray diffraction measurements on the ZnSe/(In,Ga)P/GaAs heterostructures indicate that for In compositions of 50-52%, the buffer layers with a thickness of 4 μm were only partially relaxed on the GaAs substrates, with the residual mismatch remaining at the ZnSe/III-V heterointerface. The critical thickness of (In,Ga)P, with In concentrations near 52-56%, on GaAs greatly exceeds the predicted critical thickness from either the energy balancing or force balancing model. For an In composition of 56% (and a film thickness of 4 μm), the buffer layers contain an in-plane lattice constant equal to that of ZnSe, and therefore represent the lattice-matched condition, even though the film is not fully relaxed. For (In,Ga)P buffer layers lattice-matched to ZnSe, but mismatched to GaAs, the surface exhibits the expected cross-hatched surface morphology. The occurrence of the cross-hatched surface is significantly alleviated by the addition of a pseudomorphic layer of GaAs positioned between the ZnSe and (In,Ga)P layer.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.