Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-15T02:46:15.618Z Has data issue: false hasContentIssue false
  • English
  • Français

Improved Dielectric Response in Strontium Titanate Thin Films Grown by Pulsed Laser Ablation

Published online by Cambridge University Press:  15 February 2011

M. J. Dalberth ,
R. E. Stauber ,
J. C. Price ,
C. T. Rogers  and
David Galt
M. J. Dalberth
Affiliation:
University of Colorado-Boulder, Condensed Matter Labs, Boulder CO 80309–0390
R. E. Stauber
Affiliation:
University of Colorado-Boulder, Condensed Matter Labs, Boulder CO 80309–0390
J. C. Price
Affiliation:
University of Colorado-Boulder, Condensed Matter Labs, Boulder CO 80309–0390
C. T. Rogers
Affiliation:
University of Colorado-Boulder, Condensed Matter Labs, Boulder CO 80309–0390
David Galt
Affiliation:
SCT Inc, 720 Corporate Circle, Golden CO 80401
Get access

Abstract

We have grown epitaxial strontium titanate films on lanthanum aluminate substrates at a range of oxygen pressures and substrate temperatures. The complex dielectric function was measured versus frequency (10 kHz to 1 MHz) and temperature (room temperature to 4.2 K) on coplanar capacitors patterned on the films. Preliminary data from 1.5 to 2.5 GHz is also presented. The dielectric constant εr was as high as 4600 at 65 K, a factor of two greater than previously reported for strontium titanate thin films and a factor of 1.8 greater than the bulk value at the same temperature. Tuning the capacitor by applying a dc bias of ±15 V across the 3 μm coplanar gap at 4.2 K yielded a ratio of maximum to minimum dielectric constant of 2.8. At 101 K this ratio was 2.2. A bulk capacitor does not show tuning over such a large temperature range.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 474: Symposium L – Epitaxial Oxide Thin Films III , 1997 , 43
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. For a review of bulk properties of SrTiO3, see: Jona, F. and Shirane, G., Ferroelectric Crystals. Dover Publications, Inc., New York, 1993, p. 216–261.Google Scholar
2. Neville, R. C, Hoeneisen, B. and Mead, C.A., J. Appl. Physics, 43, 5, May 1972.Google Scholar
3. Christen, H.-M., Mannhart, J., Williams, E. J., and Gerber, Ch., Phys. Rev. B, 49, p. 12095 (1994).Google Scholar
4. Krupka, J., Geyer, R. G., Kuhn, M., and Hinken, J. H., IEEE Trans. Microwave Theory Tech., 42, p. 1886 (1994).Google Scholar
5. Gait, D., Price, J.C, Beali, J. A., Ono, R. H., Appl. phys. Lett., 63, p. 3078 (1993).Google Scholar
6. Galt, D., Price, J. C., Beali, J. A., and Harvey, T. E., IEEE Trans Appl. Superconductivity, 5, 2575 (1995).Google Scholar
7. Palik, E. D., Handbook of Optical Constants of Solids Volume 2. Acedemic Press, Inc., Boston, 1991, p. 1035–1047.Google Scholar
8. Wu, H.-D., Barnes, F. S., Gait, D., Price, J. C, and Beali, J. A., “Dielectric properties of thin film SrTio3 with YBa2Cu3O7− electrodes,” SPIE International Symposium on Optoelectronic and Microwave Engineering, 2156, p. 131 (1994).Google Scholar
9. Viana, R., Lunkenheimer, P., Hemberger, J., Bohmer, R., and Loidl, A., Physical Review B, 50, p. 601 (1994).Google Scholar