Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-13T02:18:12.721Z Has data issue: false hasContentIssue false
  • English
  • Français

In Situ Ellipsometric Study of the Dependence of a-Si:H Film Growth on Substrate Properties and Ignition Procedures

Published online by Cambridge University Press:  16 February 2011

U.I. Schmidt ,
W. Herbst ,
B. Schröder  and
H. Oechsner
U.I. Schmidt
Affiliation:
University of Kaiserlautern, Department of Physics and Center of Materials Research, P.O. Box 3049, D-67653 Kaiserslautern, Germany
W. Herbst
Affiliation:
University of Kaiserlautern, Department of Physics and Center of Materials Research, P.O. Box 3049, D-67653 Kaiserslautern, Germany
B. Schröder
Affiliation:
University of Kaiserlautern, Department of Physics and Center of Materials Research, P.O. Box 3049, D-67653 Kaiserslautern, Germany
H. Oechsner
Affiliation:
University of Kaiserlautern, Department of Physics and Center of Materials Research, P.O. Box 3049, D-67653 Kaiserslautern, Germany
Get access

Abstract

In situ ellipsometry reveals that particle formation influences the growth of glow discharge a-Si:H. This particle formation is observed even under discharge conditions leading to the deposition of device quality Material. It is found that less dense material is deposited during the particle-induced initial transient stage of the discharge which influences the properties of the subsequently growing “bulk” film. The effect of special power gradient ignition procedures is discussed. A significant increase of solar cell efficency is achieved by choosing “soft” start conditions for the i-layer deposition.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 336: Symposium A – Amorphous Silicon Technology - 1994 , 1994 , 85
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Spears, K.G., Robinson, T.J., Roth, R.M., IEEE Trans. Plasma Sci., PS-14, 179 (1986)Google Scholar
2. Schmidt, U.I., Schröder, B., Oechsner, H., Thin Solid Films 233, 297 (1993)Google Scholar
3. Schmidt, U.I., Schröder, B., Oechsner, H., J. Non-Cryst. Solids 164–166, 127 (1993)Google Scholar
4. Aspnes, D.E.. Studna, A.A., Kinsbron, E., Phys. Rev. B, 29, 768 (1984)Google Scholar
5. Collins, R.W. and Pawlowski, A., J. Appl. Phys. 59, 1160 (1986)Google Scholar
6. Canillas, A., Bertrán, E., Andujar, J.L., Drevillon, B., J. App. Phys. 68, 2752 (1990)Google Scholar