Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-10T09:16:16.843Z Has data issue: false hasContentIssue false
  • English
  • Français

Indium Tin Oxide Thin Films Deposited at Low Temperature Using Dual Ion Beam Sputtering

Published online by Cambridge University Press:  03 June 2014

Wilhelmus J. Geerts ,
Nelson A. Simpson ,
Alan D. Woodall  and
Maclyn Stuart Compton
Wilhelmus J. Geerts
Affiliation:
Department of Physics, Texas State University, San Marcos, TX 78666, USA
Nelson A. Simpson
Affiliation:
Department of Physics, Texas State University, San Marcos, TX 78666, USA
Alan D. Woodall
Affiliation:
Department of Physics, Texas State University, San Marcos, TX 78666, USA
Maclyn Stuart Compton
Affiliation:
Department of Physics, Texas State University, San Marcos, TX 78666, USA
Get access

Abstract

ITO samples were sputtered at room temperature by ion assisted dual ion beam sputtering using atomic or molecular oxygen. The electrical properties appear to depend on the oxygen flow rate during deposition and the resistivity decreases for samples sputtered at a higher oxygen flow rate (1-5 sccm). The resistivity is lowest at an oxygen flow rate of 4 sccm. The average absorption in the visible part of the spectrum also decreases as a function of the oxygen flow rate and is lower for samples sputtered with atomic oxygen. The figure of merit, i.e. the ratio of the conductivity versus the average absorption in the visible range, increases for higher oxygen flow rates and is typically 20-60% higher for samples sputtered using an atomic oxygen assist beam.

Keywords

ion-beam assisted depositionoxidationoptical properties
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1699: Symposium LL – Transparent Electrodes , 2014 , mrss14-1699-ll05-28
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Suzaki, Y., Shikama, T., Electron. Com. Jpn. 82, 30–35, (1999).Google Scholar
Suzaki, Y., Shikama, T., Fukui, S., Higuchi, H., Tanaka, O., Kajitani, T., Journal of the Jpn. Soc. Precision Eng. 66, 1616–1620 (2000).10.2493/jjspe.66.1616CrossRefGoogle Scholar
Suzaki, Y., Shikama, T., Tanaka, O., Kajtani, T., Higuchi, H., and Nakamura, S., in Proc. 9th Int. Conf. Prod. Eng. 3, 601–605 (1999).Google Scholar
Lucas, B., Rammal, W., Moliton, A., Eur. Phys. J. Appl. Phys. 34, 179–187 (2006).10.1051/epjap:2006056CrossRefGoogle Scholar
Bregman, J., Shapira, Y., and Aharoni, H., J. Appl. Phys. 67, 3750–3753, (1990).10.1063/1.345017CrossRefGoogle Scholar
Han, Y., Kim, D., Cho, J.-S., Koh, S.-K., Song, Y. S., Sol. Energ. Mat. Sol. C. 65, 211–218 (2001).10.1016/S0927-0248(00)00097-0CrossRefGoogle Scholar
Cho, J.-S., Yoon, K. H., Koh, S.-K., J. Appl. Phys., 89, 3223–3228, (2001).10.1063/1.1345865CrossRefGoogle Scholar
Yuqiong, Li, Zhinong, Yu, Wuyu, Wang, Yejiang, Fan, Zhao, Ding, Wei, Xy, Rare metals 28, 559–563 (2009).Google Scholar
Kim, D., Han, Y., Cho, J.-S., Koh, S.-K., Thin Solid Films, 377–378, 81–86, (2000).10.1016/S0040-6090(00)01388-2CrossRefGoogle Scholar
Kim, Donghwan, Han, Younggun, Cho, Jun-Sik, Koh, Seok-Keun, Thin Solid Films 377–378, 81–86, (2000).10.1016/S0040-6090(00)01388-2CrossRefGoogle Scholar
Han, Younggun, Kim, Donghwan, Cho, Jun-Sik, Koh, Seok-Keun, Thin Solid Films 473, 218–223 (2005).10.1016/j.tsf.2004.05.125CrossRefGoogle Scholar
Iwatsubo, S., Vacuum 80, 708–711 (2006).10.1016/j.vacuum.2005.11.035CrossRefGoogle Scholar
Lii, Ding-Fwu, Huang, Jow-LLay, Jen, Iau-Jiu, Lin, Su-Shi, Sjgalik, Pavol, Surface and Coatings Technology 192 106–111 (2005).10.1016/j.surfcoat.2004.03.025CrossRefGoogle Scholar
Venkatachalam, S., Nanjo, Hiroshi, Hassan, Fathy M. B., Kawasaki, Kazunori, Kankubo, Mitsuhiro, Aizawa, Takafumi, Aida, Tutomu, Ebina, Takeo, Thin Solid Films 518, 6891–6896 (2010).10.1016/j.tsf.2010.07.034CrossRefGoogle Scholar
Koh, Seok-Keun, Han, Young-gun, Lee, Jung Hwan, Yeo, Un-Jung, Cho, Jun-Sik, Thin Solid Films 496, 81–88 (2006).10.1016/j.tsf.2005.08.251CrossRefGoogle Scholar
Meng, Li-Jian, Gao, Jingsong, Silva, R. A., Song, Shigeng, Thin Solid Films 516, 5454–5459 (2008).10.1016/j.tsf.2007.07.071CrossRefGoogle Scholar
Venkatachalam, S., Nanjo, H., Kawasaki, K., Waky, Y., Hayashi, Y., Ebina, T., Appl. Surf. Sci. 257, 8923–8928 (2011).10.1016/j.apsusc.2011.05.065CrossRefGoogle Scholar
Ho Lee, Sung, Cho, Sang Hyun, Kim, Hyo Jin, Kim, Sung Hong, Lee, Sang Geul, Song, Kyu Ho, Song, Pung Keun, Mol. Cryst. Liq. Cryst, 564, 185–190 (2012).10.1080/15421406.2012.691772CrossRefGoogle Scholar
Suzuki, T., Yamaki, Y., Takizawa, M., Kawasaki, O., J. Mat. Sci. 24, 187–191 (1989).10.1007/BF00660952CrossRefGoogle Scholar
Jellison, G.E., Modine, F.A., Appl. Phys. Lett. 69, 371 (1996).10.1063/1.118064CrossRefGoogle Scholar