Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-01-15T07:16:09.611Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Compatibility of Ti3Al with Various Ceramic Reinforcements

Published online by Cambridge University Press:  21 February 2011

Weimin Si ,
Pengxing Li  and
Renjie Wu
Weimin Si
Affiliation:
State University of New York at Stony Brook, Department of Materials Science and Engineering, Stony Brook, NY 11794-2275
Pengxing Li
Affiliation:
Shanghai Jiao Tong University, Department of Materials Science, Shanghai 200030, P.R. China
Renjie Wu
Affiliation:
Shanghai Jiao Tong University, Department of Materials Science, Shanghai 200030, P.R. China
Get access

Abstract

The interfacial compatibility of SiC, Al2O3, and TiC with Ti3Al alloy has been evaluated. Thin films of these three ceramics materials were deposited on Ti3A1 substrates. The thin film diffusion couples were annealed from 600°C to 1000°C, and the thickness of the interfacial layer was obtained from Auger Electron Spectroscopy (AES) concentration depth profiling. The reaction products were identified by X-ray Diffraction (XRD) and AES. In the A12O3/Ti3A1, obvious interdiffusion occurred with some reaction products. In the SiC/Ti3Al, significant interdiffusion and reactions occurred in the interfacial layer, and multilayer reaction zones were found. In the TiC/Ti3Al, the reaction product was primarily the P(Ti3AlC) phase. Kinetic studies of the growth of the interfacial layer showed that SiC reacted most severely with Ti3Al, TiC less so, and AI2O3 the least. The compatibility of these three systems has been assessed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 318: Symposium Ca – Interface Control of Electrical, Chemical, and Mechanical Properties , 1993 , 369
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 MacKay, R.A., Brindley, P.K., and Froes, F.H., J. Metals, 43 (5), 23–29 (1991).Google Scholar
2 Larsen, J.M., Revelos, W.C., and Gambone, M.L., in Intermetallic Matrix Composites II, edited by Miracle, D.B., Anton, D.L., and Graves, J.A. (Mater. Res. Soc. Symp. Proc. 273, Pittsburgh, PA, 1992) pp. 3–16.Google Scholar
3 Baumann, S.F., Brindley, P.K., and Smith, S.D., Metall. Trans. A, 21, 1559 (1990).CrossRefGoogle Scholar
4 Rhodes, C.G., in Intermetallic Matrix Composites II, edited by Miracle, D.B., Anton, D.L., and Graves, J.A. (Mater. Res. Soc. Symp. Proc. 273, Pittsburgh, PA, 1992) pp. 17–29.Google Scholar
5 Misra, A.K., Metall. Trans. A, 22, 715 (1990).Google Scholar
6 Zhang, M.-X., Hsieh, K.-C., DeKock, J., and Chang, Y.A., Scripta Metall. et Mater., 27, 1361 (1992).Google Scholar
7 Konitzer, D.G. and Loretto, M.H., Materials Science and Technology, July, 5, 627 (1989).Google Scholar
8 Metcalf, A.G. and Klein, M.J., in Interfaces in Metal Matrix Composites, edited by Metcalf, A.G. (Academic Press, New York, 1974) pp. 142–151.Google Scholar
9 Weimin, Si, “Investigation on the Interface of Titanium Aluminides Composites” (Technical Report, Shanghai Jiao Tong University, P.R.China, 1992)Google Scholar
10 Pamler, W., Appl. Phys. A, 42, 219 (1987).CrossRefGoogle Scholar
11 Schuster, J.C., Nowotny, H., and Vaccaro, C., J. Solid State Chemistry, 32, 213 (1980).Google Scholar