Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-14T17:12:30.977Z Has data issue: false hasContentIssue false
  • English
  • Français

Ionic Conductivities and Microstructures of CeO2:Y203 Solid Electrolytes

Published online by Cambridge University Press:  15 February 2011

Chunyan Tian  and
Siu-Wai Chan
Chunyan Tian
Affiliation:
Materials Science & Engineering Program, School of Engineering & Applied Science, Columbia University, New York, NY 10027
Siu-Wai Chan
Affiliation:
Materials Science & Engineering Program, School of Engineering & Applied Science, Columbia University, New York, NY 10027
Get access

Abstract

Ionic conductivities of solid CeO2:Y203 electrolytes were systematically investigated as a function of dopant concentration and sintering temperatures. The highest lattice conductivity occurred at 6–8% dopant concentration, and maximum grain boundary conductivity was observed at 10% dopant concentration. The sintering temperature was found to have a significant effect on the conductivities of the pellets. The samples sintered at lower temperatures (T≤140°C) showed higher grain boundary conductivity than those sintered at 150°C; this was found to be related to size-dependent-impurity segregation and precipitation at grain boundaries. The grain boundary conductivities as related to the microstructure are discussed by adopting different grain boundary models. Solute segregation and oxygen depletion at grain boundaries, which have been suggested to be responsible for the grain boundary resistivities in these samples, were examined by a microanalytical technique for small-grain-size samples.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 548: Symposia EE – Solid State Ionics V , 1998 , 623
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wang, D.Y. and Nowick, A.S., J. Solid State Chem., 35, 325 (1980).Google Scholar
2. Adham, K.E. and Hammou, A., Solid State lonics, 9 & 10, 905 (1981).Google Scholar
3. Wang, D. Y., Park, D. S., Griffith, J. and Nowick, A. S., Solid State lonics, 2, 95 (1981).Google Scholar
4. Balazs, G.B., Glass, R.S., Solid State lonics, 76, 155 (1995).Google Scholar
5. Sarkar, P. and Nicholson, P.S., Solid State lonics, 21, 49 (1986).Google Scholar
6. Verkerk, M.J., Middelhuis, B.J. and Burggraaf, A.J., Solid State Ionics, 6, 159 (1982).Google Scholar
7. Gerhardt, R. and Nowick, A.S., J. Amer. Ceram. Soc., 69[9], 647 (1986).Google Scholar
8. Dijk, T. van and Burggraaf, A.J., Phys. Stat. Sol. (a), 63, 229 (1981).Google Scholar
9. Badwal, S.P.S. and Rajendran, S., Solid State lonics, 70/71, 83 (1994).Google Scholar
10. Christie, G.M., Berkel, F.P.F van, Solid State lonics, 83, 17 (1996).Google Scholar
11. Guo, Xin, Solid State Ionics, 81, 235 (1995).Google Scholar
12. Schouler, E., Giroud, G. and Kleitz, M., J. Chem. Phys., 70, 1309 (1973).Google Scholar
13. Frenkel, J., “Kinetic Theory of Liquids”, Oxford University Press, New York, 1946.Google Scholar
14. Chiang, Y. M. and Takagi, Touichi, J. Am. Ceram. Soc., 73 [11], 3286 (1990).Google Scholar