Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-13T02:24:59.353Z Has data issue: false hasContentIssue false
  • English
  • Français

Mass-printed integrated circuits with enhanced performance using novel materials and concepts

Published online by Cambridge University Press:  07 June 2011

Georg C. Schmidt ,
Maxi Bellmann ,
Heiko Kempa ,
Mike Hambsch ,
Kay Reuter ,
Michael Stanel  and
Arved C. Hübler
Georg C. Schmidt
Affiliation:
Chemnitz University of Technology, Institute for Print and Media Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Maxi Bellmann
Affiliation:
Chemnitz University of Technology, Institute for Print and Media Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Heiko Kempa
Affiliation:
Martin-Luther-University of Halle-Wittenberg, Institute of Physics, Section Photovoltaics 06099 Halle, Germany
Mike Hambsch
Affiliation:
The University of Queensland, Centre for Organic Photonics and Electronics, Brisbane 4072, Australia
Kay Reuter
Affiliation:
Chemnitz University of Technology, Institute for Print and Media Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Michael Stanel
Affiliation:
Chemnitz University of Technology, Institute for Print and Media Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Arved C. Hübler
Affiliation:
Chemnitz University of Technology, Institute for Print and Media Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Get access

Abstract

Printed electronics is a seminal technology for the production of simple disposable electronic products. In comparison to conventional silicon electronics it offers the possibility to use potentially cheap materials (e.g. polymers) which can be processed as solutions or dispersions by means of highly productive mass printing technologies. One main aim is the production of fully mass printed electronic circuits for the identification of single items, which should not cost more than one cent per tag. For the realization several challenges have to be clarified. On the one hand the performance of the - often organic - materials has to be increased in interaction with the used printing technologies. On the other hand the printing methods themselves have to be adapted and continuously improved. Alternatively, new approaches for the preparation of structured thin films have to be developed. This paper introduces a new technique for the production of source/drain electrodes with high resolution.

Keywords

microstructureorganicthin film
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1285: Symposium D – Challenges in Roll-to-Roll (R2R) Fabrication for Electronics and Other Functionalities , 2011 , mrsf10-1285-d03-06-f06-06-g07-06
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hübler, A. et al. , Org. Electr. 8, (2007) pp. 480–486.Google Scholar
2. Zielke, D. et al. , Appl. Phys. Lett. 87 (12, S) (2005) pp. 123508–123510.Google Scholar
3. Hambsch, M. et al. , Mater. Sci. Eng. B 170, (2010) pp. 93–98.Google Scholar
4. Park, S.K. et al. , IEDM Tech. Digest (2005) 105.Google Scholar
5. Yan, H. et al. , Adv. Mater. 20, (2008) 3393.Google Scholar
6. Reuter, K. et al. , Org. Electr. 11, (2010) 95.Google Scholar
7. Lim, J. A. et al. , Appl. Phys. Lett. 88, (2006), 082102.Google Scholar
8. Hoppe, A. et al. , Org. Electr. 11, (2010) pp. 626–631.Google Scholar