Hostname: page-component-6bf8c574d5-t27h7 Total loading time: 0 Render date: 2025-02-22T23:22:54.955Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Rapidly Solidified MG-ZN Alloys

Published online by Cambridge University Press:  25 February 2011

D. Themines ,
W. Riehemann ,
W. Henning  and
B.L. Mordike
D. Themines
Affiliation:
Equipe Matériaux-Mikrostructure, L.A. 251, ISMRa Université Caen, Rue d' Edimbourg, 14032 Caen, France
W. Riehemann
Affiliation:
Institut für Werkstoffkunde und Werkstofftechnik, Technische Universitüät, Agricolastr. 2, 3392 Clausthal-Zellerfeld, FRG
W. Henning
Affiliation:
Institut für Werkstoffkunde und Werkstofftechnik, Technische Universitüät, Agricolastr. 2, 3392 Clausthal-Zellerfeld, FRG
B.L. Mordike
Affiliation:
Institut für Werkstoffkunde und Werkstofftechnik, Technische Universitüät, Agricolastr. 2, 3392 Clausthal-Zellerfeld, FRG
Get access

Abstract

Rapidly quenched alloys differ from those that are conventionally solidified in the degree of supersaturation, the microstructure and the grain size. The quenching rate can thus be used to modify the mechanical properties. A fine grain size increases the hardness and ductility. The precipitation behaviour is modified by the high density of heterogeneous nuclei or high density of quenched in defects in that the rate of precipitation is increased. Discontinuous precipitation should make a significant contribution to the increase in strength as a result of the fine grain size.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 58 , 1985 , 275
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

LITERATURE

1.Calka, A., Madhaoa, M., Polk, D. E., Giessen, B. C., Matyja, H. and Samde, J. von der, Ser. Mat. 11, 65 (1977).Google Scholar
2.Calka, A. and Matyja, H., Amorphous Metallic Materials, ed. Juhaj, P. and Mrafka, P. (VEDA, Bratislava, 1980)Google Scholar
3.Elliott, R. P., Constituion of Binary Alloys, (McGraw-Hill, 1965)Google Scholar
4.Jones, H., Rapid Solidification of Metals and Alloys, (The Institution of Metallurgists, London, 1982)Google Scholar
5.Hardie, D. and Perkins, R. N., Phil. Mag. 4, 815 (1959)Google Scholar