Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-11T06:01:54.479Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Thin Film Silicon Carbide

Published online by Cambridge University Press:  15 March 2011

Kamili M. Jackson ,
Richard L. Edwards ,
Guy F. Dirras  and
William N. Sharpe Jr.
Kamili M. Jackson
Affiliation:
Department of Mechanical Engineering Johns Hopkins University, Baltimore, MD 21218
Richard L. Edwards
Affiliation:
Johns Hopkins Applied Physics Laboratory, Laurel, MD 20723
Guy F. Dirras
Affiliation:
LPMTM-CNRS, Institut Galilee, University Paris XIII, Villetaneuse, France
William N. Sharpe Jr.
Affiliation:
Department of Mechanical Engineering Johns Hopkins University, Baltimore, MD 21218
Get access

Abstract

Silicon carbide is a very attractive material for a variety of applications. Originally considered for use in high power and high temperature electronics because of its large bandgap, designers of MEMS are now considering use of silicon carbide because of its stability at high temperatures, resistance to corrosives, high stiffness, and radiation resistance. However, as with any new structural material, its mechanical properties must be measured for design information. This research measures the elastic modulus, strength, and Poisson's ratio of two different silicon carbides using microtensile testing. One material is a 0.5-1νm thick film from Case Western Reserve University. Preliminary results give an average of 420 GPa for elastic modulus, a strength of 1.2 GPa, and a Poisson's ratio of 0.19. The second material is from Massachusetts Institute of Technology with an average thickness of 30 microns. Preliminary results show an elastic modulus of 430 GPa, a strength of 0.49 GPa, and a Poisson's ratio of 0.24. In addition to the most recent results, techniques used to obtain these results, microstructure investigations, and a comparison of the materials are detailed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 687: Symposium B – Materials Science of Microelectromechanical Systems (MEMS) Devices IV , 2001 , B6.3
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Zorman, C.A., Fleischman, A.J., Dewa, A.S., and Mehregany, M., Journal of Applied Physics 78, 1536 (1995).Google Scholar
2. Lambrecht, W.R.L., Segall, B., Methfessel, M., Schilfgaarde, W. van, Physical Review B 44, 3685 (1991).Google Scholar
3. Karch, K., Pavone, P., Windl, W., Strauch, D., and Bechstedt, F., International Journal of Quatum Chemistry 56, 801 (1995).Google Scholar
4. Tolpygo, K.B., Soviet Physics Solid State 2, 2367 (1961).Google Scholar
5. Slack, G.A., Journal of Applied Physics 44, 3460 (1964)Google Scholar