Hostname: page-component-cb9f654ff-mwwwr Total loading time: 0 Render date: 2025-08-22T01:33:48.383Z Has data issue: false hasContentIssue false
  • English
  • Français

Microwave processing CaO-Al203-SiO2 Glass Using Sol-Gel Technique

Published online by Cambridge University Press:  10 February 2011

Y. Zhou ,
O. Van der Biest ,
C. Groffils  and
P. J. Luypaert
Y. Zhou
Affiliation:
Dept. of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, De-Croylaan 2, B-3001 Heverlee, Belgium.
O. Van der Biest
Affiliation:
Dept. of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, De-Croylaan 2, B-3001 Heverlee, Belgium.
C. Groffils
Affiliation:
Dept. of Electrical Engineering, Katholieke Universiteit Leuven, Kard. Mercierlaan 94, B-3001 Heverlee, Belgium.
P. J. Luypaert
Affiliation:
Dept. of Electrical Engineering, Katholieke Universiteit Leuven, Kard. Mercierlaan 94, B-3001 Heverlee, Belgium.
Get access

Abstract

Gels in the CaO-A12O3-SiO2 (CAS) system were successfully converted into glass in a single mode, tuneable, cylindrical microwave applicator, operating at 2.45 GHz in the TM012 mode. Transparent glasses were formed as a result of the direct microwave heating of homogeneous CAS gels to well above their melting temperature (1170°C). The effect of processing parameters, such as incident power level, sample mass and location, and thermal insulation has been investigated. The excellent coupling of the CAS gel with microwave can be understood from the structural evolution during sol-gel processing.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 430: Symposium O – Microwave Processing of Materials V , 1996 , 131
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Sutton, W. H. in Microwave Processing of Materials III, edited by Beatty, R. L., Sutton, W. H., and Iskander, M. F., Mat. Res. Soc.Symp. Proc. 269, Pittsburge, PA, 1992, pp. 3–20.Google Scholar
2. Brinker, C. J., Keefer, K. D., Schaefer, D. W. and Ashley, C. S., J. Non-Cryst. Solids, 48, 47–64 (1982).Google Scholar
3. Pancrazi, F., Phalippou, J., Sorrentino, F. and Zarzycki, J., J. Non-Cryst. Solids, 63, 81–93 (1984).Google Scholar
4. Yoldas, B. E., J. Mat. Sci. 12, 1203–1208 (1977).Google Scholar
5. Meek, T. T., Holcombe, C. E. and Dykes, N., J. Mater. Sci. Lett. 6, 1060–1062 (1987).Google Scholar