Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-13T02:23:48.310Z Has data issue: false hasContentIssue false
  • English
  • Français

Novel Method for Controlling Nano Thin Coatings on Particulate Materials

Published online by Cambridge University Press:  15 February 2011

J. Fitz-Gerald ,
S. Pennycook ,
H. Gao ,
V. Krishnamoorthy ,
J. Marcinka ,
W. Glenn  and
R.K. Singh
J. Fitz-Gerald
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida
S. Pennycook
Affiliation:
ORNL Solid State Division
H. Gao
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida
V. Krishnamoorthy
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida
J. Marcinka
Affiliation:
Department of Electrical Engineering, Florida Atlantic University, Boca Raton, Florida
W. Glenn
Affiliation:
Department of Electrical Engineering, Florida Atlantic University, Boca Raton, Florida
R.K. Singh
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida
Get access

Abstract

Particulate coatings have wide ranging applications in several new technologies such as flat-panel displays, sintering of advanced ceramics, rechargeable batteries, etc. In this paper, we show the feasibility of the pulsed laser ablation technique to make very thin, uniformly distributed and discrete coatings in particulate systems so that the properties of the core particles can be suitably modified. Presently, laser ablation techniques have been primarily applied to deposit thin films on flat substrate materials. To deposit discontinuous particulate coatings, the laser induced plume from the target comes in contact with an agitated bed of core particles. The pressure and nature of the background gas (inert or active) controls the cluster size of the nano particles in the laser plume. Experiments were conducted for laser deposition of Ag nano particles on Al2O3 and SiO2 core particles by pulsed excimer laser (wavelength = 248 nm and pulse duration = 25 nanosecond) irradiation of a Ag sputtering target The surface coverage and coating uniformities of the film were found to depend on the synthesis parameters (energy density, # laser pulses, gas pressure backfill gas, molecular weight) as well as the residence time of the core particles in the plume regime. The films were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), wavelength dispersive x-ray analysis (WDX), scanning transmission electron microscopy (STEM), and x-ray photoelectron spectroscopy (XPS).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 526: Symposium Y – Advances in Laser Ablation of Materials , 1998 , 105
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Singh, R.K. and Narayan, J., Phys. Rev B, 43, 8843 (1990).Google Scholar
2. Singh, R.K., Narayan, J., Singh, A.K. and Krishnaswamy, J., Appl. Phys. Lett.Google Scholar
3. Singh, R.K. and Kumar, D., Mat. Sci. and Rep, (in press), 1998.Google Scholar
4. Geohegan, D.B. and Putretsky, A.A., Mat. Sci Soc Symposia, Eds Singh, R.K. et al. Google Scholar
5. Rinnen, K.D., Kolenbrabder, K.D., DeSantioolo, A.M., Mandich, M.L., J.Chem Phy. 96, 4088 (1992).Google Scholar
6. Yoshida, T., Takeyama, S., Yamada, Y., Mutoh, K., Appl. Phys. Lett, 68, 1772 (1996).Google Scholar
7. Lowdnes, D.L., Geohegan, D.B., Puretsky, A.A., Norton, D.P. and Rouleau, C. M., Science, 273, 898 (1996).Google Scholar
8. Singh, R. K., Ata, A., Fitz-Gerald, J., Rabinovich, Y., Hendrickson, W., Kona 15, 121–131 (1997).Google Scholar
9. Singh, R. K., Ata, A., Fitz-Gerald, J., Rabinovich, Y., Hendrickson, W., Surface Modification Technologies X, Proceedings of the Tenth International Conference on Surface Modification Technologies, 909–917 (1997).Google Scholar
10. Takao, Y., Awano, M., Kawahara, Y., Murase, Y., Kona, 14, 168 (1996).Google Scholar
11. Awano, M., Takau, Y., Kani, K., Takagi, H., J. Chem. Eng. Jpn. 25, 508, (1992).Google Scholar
12. Fitz-Gerald, J., Trottier, T., Singh, R. K., Holloway, P. H., Applied Physics Letters 72, (1998).Google Scholar