Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-10T09:48:45.322Z Has data issue: false hasContentIssue false
  • English
  • Français

Novel Synthesis Process and Characterization of Li-Mn-O Spinels for Rechargeable Lithium Batteries

Published online by Cambridge University Press:  10 February 2011

Toshimi Takada ,
Hirotoshi Enoki ,
Etsuo Akiba ,
Takenori Ishizu  and
Tatsuo Horiba
Toshimi Takada
Affiliation:
National Institute of Materials and Chemical Research, Ibaraki, Japan; takada@nimc.go.jp
Hirotoshi Enoki
Affiliation:
National Institute of Materials and Chemical Research, Ibaraki, Japan; takada@nimc.go.jp
Etsuo Akiba
Affiliation:
National Institute of Materials and Chemical Research, Ibaraki, Japan; takada@nimc.go.jp
Takenori Ishizu
Affiliation:
Shin-Kobe Electric Machinery Ltd, Saitama, Japan.
Tatsuo Horiba
Affiliation:
Shin-Kobe Electric Machinery Ltd, Saitama, Japan.
Get access

Abstract

A new process has been developed for the synthesis of well-crystallized Li-Mn-O spinels with a homogeneous composition Li[LixMn2-x]O4 (0.0≤x≤0.333) using the stoichiometry mixtures of lithium acetate and manganese nitrate as starting materials. The crystal structure of these compounds was studied with Rietveld refinements of the X-ray diffraction profiles. The lattice parameter of the spinels shows a strong dependence on the composition and manganese oxidation state. SEM micrographs indicate that the crystallites appear as single crystals. The size of the crystallites are in the range of 0.1 – 2μm, depending on the synthesis conditions. Samples with x≤0.125 show good electrode performance for the cell Li/Li1+xMn2-xO4 in the 4V region, whereas Li4Mn5O2 (x=0.333) spinels show good cyclability with a rechargeable capacity of over 100mAh/g in the 3V region.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 496: Symposium Y – Materials For Electrochemical Energy Storage & Conversion II… , 1997 , 257
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gummow, R. J., de Kock, A., and Thackeray, M. M., Solid State Ionics, 69, 59 - 67 (1994).10.1016/0167-2738(94)90450-2Google Scholar
2. Gao, Y. and Dahn, J. R., J. Electrochem. Soc., 143, 100 - 114 (1996).10.1149/1.1836393Google Scholar
3. Thackeray, M. M., Mansuetto, M. F., Dees, D.W., and Vissers, D. R., Mater. Res. Bull., 31 (1996) 133- 140.10.1016/0025-5408(95)00190-5Google Scholar
4. Takada, T., Hayakawa, H., and Akiba, E., J. Solid State Chem., 115, 420 - 426 (1995).10.1006/jssc.1995.1154Google Scholar
5. Izumi, F. in The Rietveld Method, edited by Young, R. A., Oxford University Press, New York (1993), pp. 236–253.Google Scholar
6. Japan Industrial Standard (JIS) M8233–1982, “Determination of Active Oxygen Content in Manganese Ores”.Google Scholar
7. Takada, T., Hayakawa, H., Akiba, E., Izumi, F., and Chakoumakos, B., J. Solid State Chem., 130, 74–80 (1997).10.1006/jssc.1997.7282Google Scholar
8. Takada, T., Enoki, H., Hayakawa, H., and Akiba, E., J. Solid State Chem., submitted. Google Scholar