Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-10T06:26:57.178Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimizing Morphology and Structure with Multi-Signal FIB/SEM Tomography

Published online by Cambridge University Press:  27 February 2012

Lucille A. Giannuzzi
Lucille A. Giannuzzi*
Affiliation:
L.A. Giannuzzi and Associates, Fort Myers, FL 33913, U.S.A
Get access

Abstract

Focused ion beam (FIB) milling coupled with scanning electron microscopy (SEM) on the same platform enables 3D microstructural analysis of structures using FIB for serial sectioning and SEM for imaging. Since FIB milling is a destructive technique, the acquisition of multiple signals from each slice is desirable. The feasibility of collecting both an inlens backscattered electron (BSE) signal and an inlens secondary electron (SE) simultaneously from a single scan of the electron beam from each FIB slice is demonstrated. The simultaneous acquisition of two different SE signals from two different detectors (inlens vs. Everhart-Thornley (ET) detector) is also possible. Obtaining multiple signals from each FIB slice with one scan increases the acquisition throughput. In addition, optimization of microstructural and morphological information from the target is achieved using multi-signals. Examples of multi-signal FIB/SEM tomography from a dental implant will be provided where both material contrast from the bone/ceramic coating/Ti substrate phases and porosity in the ceramic coating will be characterized.

Keywords

biomaterialporosityscanning electron microscopy (SEM)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1421: Symposium PP – Three-Dimensional Tomography of Materials , 2012 , mrsf11-1421-pp07-03
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Giannuzzi, L.A. and Stevie, F.A. Introduction to Focused Ion Beams: Instrumentation, Theory, Techniques and Practice (Springer, New York, 2005).Google Scholar
[2] Giannuzzi, L.A., Giannuzzi, N.J., Capuano, M.J., Microsc. Microanal. 11, 998 (2005).Google Scholar
[3] Giannuzzi, L.A., Phifer, D., Giannuzzi, N.J., Capuano, M.J., J. Oral Maxillofac. Surg., 65, 737, (2007).Google Scholar
[4] Jarmar, T., Palmquist, A., Brånemark, R., Hermansson, L., Engqvist, H., Thomsen, P.. J. Biomed. Mater. Res. A., 87, 1003, (2008).Google Scholar
[5] Jarmar, T, Palmquist, A, Brånemark, R, Hermansson, L, Engqvist, H, Thomsen, P. Clin. Implant Dent. Relat. Res., 10, 11, (2008).Google Scholar
[6] Grandfield, K., McNally, E.A., Palmquist, A., Botton, G.A., Thomsen, P., Engqvist, H.. J. R. Soc. Interface., 7, 1497, (2010).Google Scholar
[7] Goldstein, J., Newbury, D.E., Joy, D.C., Lyman, C.E., Echlin, P., Lifshin, E., Sawyer, L., Michael, J.R.. Scanning Electron Microscopy and X-ray microanalysis. 3rd Edition. (Springer, New York, 2003).Google Scholar