Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-10T17:26:22.820Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxidation Protection of γ-TiAl Alloys by Intermetallic Ti-Al-Cr-Zr Coatings

Published online by Cambridge University Press:  29 November 2012

Reinhold Braun ,
Klemens Kelm ,
Arutiun P. Ehiasarian  and
Papken Eh. Hovsepian
Reinhold Braun
Affiliation:
DLR – German Aerospace Center, Institute of Materials Research, D-51170 Cologne, Germany.
Klemens Kelm
Affiliation:
DLR – German Aerospace Center, Institute of Materials Research, D-51170 Cologne, Germany.
Arutiun P. Ehiasarian
Affiliation:
Nanotechnology Centre for PVD Research, Sheffield Hallam University, Howart Street, Sheffield S1 1WB, United Kingdom.
Papken Eh. Hovsepian
Affiliation:
Nanotechnology Centre for PVD Research, Sheffield Hallam University, Howart Street, Sheffield S1 1WB, United Kingdom.
Get access

Abstract

The oxidation behavior of γ-TiAl specimens coated with an intermetallic Ti-49Al-34Cr-4Zr layer was investigated at 1000°C under cyclic conditions in laboratory air. The 11 μm thick coating was produced using a combined technique of high power impulse magnetron sputtering and unbalanced magnetron sputtering. The as-deposited coating exhibited a dense layered structure and excellent adhesion to the substrate. The Ti-Al-Cr-Zr coating possessed high oxidation resistance associated with the formation of a thin continuous alumina scale for exposure time periods exceeding 1000 cycles of 1 h dwell time at 1000°C. During the high temperature exposure, the coating being amorphous in the as-deposited condition became crystalline exhibiting different polytypes of Ti(Cr,Al)2Laves phases with Ti probably partially substituted by Zr and Nb. Due to alumina formation and interdiffusion the coating was depleted in aluminum and chromium as well as enriched in titanium. After 1000 cycles at 1000°C, the coating consisted of an outer layer of the hexagonal C14 Laves phase and an inner layer of a probably orthorhombic phase whose structure was not yet determined. In both layers, pores and fine precipitates rich in Zr and Y were found.

Keywords

coatingoxidationcrystallographic structure
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1516: Symposium JJ – Intermetallic-Based Alloys—Science, Technology and Applications , 2013 , pp. 89 - 94
Copyright
Copyright © Materials Research Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Clemens, H. and Kestler, H., Adv. Eng. Mater. 2, 551 (2000).10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U3.0.CO;2-U>CrossRef3.0.CO;2-U>Google Scholar
Wu, X., Intermetallics 14, 1114 (2006).CrossRefGoogle Scholar
Yoshihara, M. and Kim, Y.-W., Intermetallics 13, 952 (2005).CrossRefGoogle Scholar
Brady, M.P., Brindley, W.J., Smialek, J.L. and Locci, I.E., JOM 48, 46 (November 1996).CrossRefGoogle Scholar
Leyens, C., Braun, R., Fröhlich, M. and Hovsepian, P.Eh., JOM 58, 17 (January 2006).10.1007/s11837-006-0062-4CrossRefGoogle Scholar
Fox-Rabinovich, G.S., Weatherly, G.C., Wilkinson, D.S., Kovalev, A.I. and Wainstein, D.L., Intermetallics 12, 165 (2004).10.1016/j.intermet.2003.09.014CrossRefGoogle Scholar
Brady, M.P., Smialek, J.L., Smith, J. and Humphrey, D.L., Acta Mater. 45, 2357 (1997).10.1016/S1359-6454(96)00362-XCrossRefGoogle Scholar
Brady, M.P., Smialek, J.L., Humphrey, D.L. and Smith, J., Acta Mater. 45, 2371 (1997).10.1016/S1359-6454(96)00361-8CrossRefGoogle Scholar
Fröhlich, M., Braun, R. and Leyens, C., Surf. Coat. Technol. 201, 3911 (2006).10.1016/j.surfcoat.2006.07.248CrossRefGoogle Scholar
Braun, R., Fröhlich, M. and Leyens, C., Int. J. Mat. Res. 101, 637 (2010).10.3139/146.110322CrossRefGoogle Scholar
Jewett, T. J. and Dahms, M., Z. Metallkd. 87, 254 (1996).Google Scholar
Markiv, V.Y. and Burnashova, V.V., Poroshk. Metall. 12, 53 (1970).Google Scholar
Hovsepian, P.Eh., Ehiasarian, A.P., Purandare, Y.P., Braun, R. and Ross, I.M., Plasma Process. Polym. 6, S118 (2009).10.1002/ppap.200930412CrossRefGoogle Scholar
Jewett, T.J., Ahrens, B. and Dahms, M., Mater. Sci. Eng. A225, 29 (1997).10.1016/S0921-5093(96)10841-8CrossRefGoogle Scholar
Zhuang, W., Shen, J., Liu, Y., Ling, L., Shang, S., Du, Y., Schuster, J.C., Z. Metallkd. 91, 121(2000).Google Scholar
Pint, B.A., Oxid. Met. 45, 1 (1996).10.1007/BF01046818CrossRefGoogle Scholar