Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-10T11:16:40.699Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxidative Jet Deposition of Polythiophenes

Published online by Cambridge University Press:  04 February 2011

A. Davison Gilpin  and
F. James Boerio
A. Davison Gilpin
Affiliation:
Department of Chemical and Materials Engineering University of Cincinnati, Cincinnati, OH 45221-0012, USA
F. James Boerio
Affiliation:
Department of Chemical and Materials Engineering University of Cincinnati, Cincinnati, OH 45221-0012, USA
Get access

Abstract

An oxidative jet deposition process was used to deposit films of polythiophenes. The oxidative jet is created using two different methods, an ozone jet or a plasma jet. An ozone jet is created by forcing a gas mixture containing oxygen through a corona-discharge apparatus. A plasma jet is created by forcing an ionization gas through a radio-frequency plasma chamber. Polymerization and film deposition was achieved by rastering the jet over a substrate while a monomer was injected into the oxidative jet. The injected monomers include thiophene, 2-methylthiophene, 3-methylthiophene, and 3,4-ethylenedioxythiophene (EDOT). The resulting films were studied with Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and time-of-flight secondary ion mass spectrometry (TOF-SIMS). FTIR spectra of the jet deposited films were characteristic of undoped poly(3,4-ethylenedioxythiophene) PEDOT. FTIR spectra showed that parameter optimized plasma jet deposited films contained less overoxidation in the form of hydroxyl and carbonyl groups than films deposited through the ozone jet process. The fabrication of organic electronics could be improved by this technology because a jet process allows for inline processing. Inline processing offers practical industrial advantages over the batch process methods currently used for depositing films of polythiophenes.

Keywords

polymerthin filmmass spectroscopy
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1288: Symposium G – Novel Fabrication Methods for Electronic Devices , 2011 , mrsf10-1288-g06-04
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kirchmeyer, S. and Reuter, K., J. Mater. Chem. 15, 2077 (2005).Google Scholar
2. Schutze, A., Jeong, J.Y., Babayan, S.E., Park, J., Selwyn, G.S., and Hicks, R.F., IEEE Trans. Plasma Sci. 26, 1685 (1998).Google Scholar
3. Albaugh, J., O’Sullivan, C., and O’Neill, L., Surf. Coat. Technol. 203, 844 (2008).Google Scholar
4. Garreau, S., Louarn, G., Buisson, J.P., Froyer, G., and Lefrant, S., Macromolecules 32, 6807 (1999).Google Scholar
5. Winther-Jensen, B. and West, K., Macromolecules 37, 4538 (2004).Google Scholar
6. Kvarnström, C., Neugebauer, H., Blomquist, S., Ahonen, H.J., Kankare, J., and Ivaska, A., Electrochim. Acta 44, 2739 (1999).Google Scholar
7. Tran-Van, F., Garreau, S., Louarn, G., Froyerb, G., and Chevrot, C., J. Mater. Chem. 11, 1378 (2001).Google Scholar
8. Kissel, J. and Krueger, F., Rapid Communications in Mass Spectrometry 15, 1713 (2001).Google Scholar
9. Bailey, P.S. and Hwang, H.H., J. Org. Chem. 50, 1778 (1985).Google Scholar