Hostname: page-component-745bb68f8f-hvd4g Total loading time: 0 Render date: 2025-01-15T07:15:52.418Z Has data issue: false hasContentIssue false
  • English
  • Français

Parametric Studies on Suppression of Secondary Phases in LiNbO3 Thin Films Deposited by Pulsed Laser Deposition

Published online by Cambridge University Press:  01 February 2011

Ji-Won Son ,
Sergei S. Orlov ,
Bill Phillips  and
Lambertus Hesselink
Ji-Won Son
Affiliation:
Solid State Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.
Sergei S. Orlov
Affiliation:
Solid State Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.
Bill Phillips
Affiliation:
Solid State Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.
Lambertus Hesselink
Affiliation:
Solid State Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.
Get access

Abstract

We performed a parametric study to suppress secondary phases in lithium niobate thin films by using pulsed laser deposition (PLD). A KrF excimer laser (λ=248nm) was used as a PLD source and c-oriented sapphire was used as substrates, for waveguide applications. By reducing the growth rate and changing the ambient gas pressure respectively, we found that the main parameter suppressing a secondary phase is controlling the plume strength. To investigate the relation between film phases and the plume strength, extensive parametric studies were performed by changing the oxygen ambient pressure, the target to substrate distance, and also the Li content in the target. The surface morphologies of single phase films and Li-deficient phase mixed films are compared and related to the growth mechanism with a lattice misfit. Deposition parameters to achieve lower loss films are also discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 784: Symposium C – Ferroelectric Thin Films XII , 2003 , C11.24
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gopalan, V., Sanford, N. A., Aust, J. A., Kitamura, K. and Furukawa, Y., Handbook of Advanced Electronic and Photonic materials and Devices, edited by Nalwa, H. S. (Academic Press, 2001), Vol. 4, Chap. 2.Google Scholar
2. Yamada, A., Tamada, H., and Saitoh, M., J. Crys. Growth, 132, 48–60 (1993).Google Scholar
3. Higuchi, S. and Tsukada, I., Jpn. J. Appl. Phys., 42, L1066, (2003).Google Scholar
4. Gonzalo, J., Afonso, C. N., Ballesteros, J. M., Grosman, A., and Ortega, C., J. Appl. Phys., 82(6), 3129, (1997).Google Scholar
5. Lee, S. Y. and Feigelson, R. S., J. Crys. Growth, 186, 594–606 (1998).Google Scholar