Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-10T07:05:55.847Z Has data issue: false hasContentIssue false

Photo Induced Deposition of Thin Silicon Dioxide Films Using a Novel Large Area Excimer Lamp

Published online by Cambridge University Press:  28 February 2011

P. Patel
Affiliation:
Electrical & Electronic Engineering, University College London, Torrington Place, London WC1 E7JE, UK
U. Kogelschatz
Affiliation:
Asea Brown Boveri Corporate Research, 5405 Baden, Switzerland
P. Bergonzo
Affiliation:
Electrical & Electronic Engineering, University College London, Torrington Place, London WC1 E7JE, UK
I. W. Boyd
Affiliation:
Electrical & Electronic Engineering, University College London, Torrington Place, London WC1 E7JE, UK
Get access

Abstract

There is a growing interest in the deposition and processing of thin films at low temperatures to eliminate the inherent problems associated with high temperature processing. Photo enhanced processing is one of the techniques which has received considerable interest. One of the major limitations of photo processing is the lack of sufficiently intense ultra-violet (UV) sources. To date the low pressure Hg lamp has been the only available source for large area UV processing and this has limited the types and quality of films deposited.

In this paper we will outline the design of a novel, variable wavelength excimer discharge lamp which can be used for depositing thin films over large substrate areas. We shall also discuss the direct (i.e. without intermediate photosensitisation reactions) photo induced deposition of thin silicon dioxide films using SiH4 and N2O which are photo dissociated by 126nm photons generated by the excimer lamp described.

Type
Research Article
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Patel, P. and Boyd, Ian W., Appl. Surf. Sci. 46, 352, (1990)Google Scholar
2. Nayar, V., Patel, P. and Boyd, Ian W., Electronics Letters 26, 205 (1990)Google Scholar
3. Vinckier, C. and De Jaegere, S., J. Electrochem. Soc. 137, 628 (1990)Google Scholar
4. Buchanan, D. A., Appl. Phys. Lett. 56, 1037 (1990)Google Scholar
5. Suemitsu, M., Kaneko, T., Miymoto, N., Japan. J. Appl. Phys. 28, 2421 (1989)Google Scholar
6. Marks, J. and Robertson, R. E., Appl. Phys. Lett. 52, 810 (1988)Google Scholar
7. Krusor, B. S., Biegelsen, D. K., Yingling, R. D., Abelson, J. R., J. Vac. Sci. Technol. B7, 129 (1989)Google Scholar
8. Boyd, Ian W., Laser Processing of Thin Films and Microstructures Springer-Verlag, New York, (1987)Google Scholar
9. Padmanabham, R. and Miller, B. J., J. Vac. Sci. Technol. A4, 363 (1986)Google Scholar
10. Usami, K., Mochizuki, Y., Minagawa, T., Iida, A., Gohshi, Y., Japan. J. Appl. Phys. 25, 1449 (1986)Google Scholar
11. Boyer, P. K., Roche, G. A., Ritchie, W., Collins, G., Appl. Phys. Lett. 40, 716 (1982)Google Scholar
12. Meek, J. M. and Craggs, J. D., Electrical Breakdown of Gases, Wiley Interscience Publications, 1978 Google Scholar
13. Eliasson, B., Kogelschatz, U. and Stein, H. J., EPA NewsLetter 32, 29 (1988)Google Scholar
14. Eliasson, B. and Kogelschatz, U., J. Phys. D: Appl. Phys. 20, 1421 (1987)Google Scholar
15. Rhodes, Ch. K., Excimer Lasers, Topics in Appl. Phys. Vol 30, Springer, Berlin (1984)Google Scholar
16. Eliason, B. and Kogelschatz, U., Appl. Phys. B. 46, 299 (1988)Google Scholar