Published online by Cambridge University Press: 25 February 2011
Si thin films were deposited on quartz at temperatures ( TD ) ranging from 540 to 640°C. X-ray diffraction indicates that films deposited at TD < 580°C are amorphous, while those deposited above 600°C are poly-crystalline with a <220> texture. The Si films were made porous by stain-etching in HF:HNO3:H2O. Only Si films deposited at 590°C and above show photoluminescence (PL), centered at ∼650-670 nm under UV excitation. Films deposited at TD < 580°C do not luminesce even after very long etch times, which produce a highly porous structure. The PL intensity and the x-ray signal follow a very similar trend with TD. It appears that a minimum level of crystallinity is required for photoemission in porous Si and that a strong relationship exists between them.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.