Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-30T23:06:01.307Z Has data issue: false hasContentIssue false
  • English
  • Français

Photopolymerization of Lyotropic Liquid Crystalline Systems: A New Route to Nanostructured Materials

Published online by Cambridge University Press:  15 March 2011

Colleen D. Colson ,
Christopher L. Lester  and
C. Allan Guymon
Colleen D. Colson
Affiliation:
Department of Polymer Science, University of Southern Mississippi, Hattiesburg, MS 39406-0076, Colleen.Colson@usm.edu, Allan.Guymon@usm.edu
Christopher L. Lester
Affiliation:
Department of Polymer Science, University of Southern Mississippi, Hattiesburg, MS 39406-0076, Colleen.Colson@usm.edu, Allan.Guymon@usm.edu
C. Allan Guymon
Affiliation:
Department of Polymer Science, University of Southern Mississippi, Hattiesburg, MS 39406-0076, Colleen.Colson@usm.edu, Allan.Guymon@usm.edu
Get access

Abstract

In recent years, a considerable amount of research has been dedicated to synthesizing highly ordered nanostructured materials. One way to achieve this is through templated polymerizations. A novel route to fabricating such materials is through the use of lyotropic liquid crystals (LLCs) that possess highly ordered nanostructures. However, LLC phases lack the necessary physical robustness. So, templating LLC phase morphology onto other materials such as organic polymers would give a nanostructure retained as part of a robust polymeric matrix. This study focuses on the photopolymerization behavior and structure retention of hydroxyethyl acrylate (HEA) / dodecyltrimethyl ammonium bromide (DTAB) / water system in a select LC phase. The results suggest that the polymerization behavior is heavily dependent on the type of LLC structure. Specifically, lamellar aggregates polymerize faster than either cubic or isotropic morphologies due to diffusional limitations on the growing polymer chain. Monomer segregation also plays a role in determining the polymerization rates. Results also indicate that the original LLC order of these systems is largely retained upon photopolymerization although some LLC phases do change upon cure. This order would be useful in applications such as ultrafiltration membranes, separation media, and drug delivery systems.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 709: Symposium CC – Advances in Liquid Crystalline Materials and Technologies , 2001 , CC9.5.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gray, G. W. and Winsor, P. A. in Liquid Crystals and Plastic Crystals, 1st ed. edited by Gray, G. W. and Winsor, P. A. (John Wiley & Sons, New York, 1974) Vol. 1, p. 314.Google Scholar
2. Kelker, H., and Hatz, R., Handbook of Liquid Crystals, 1st ed. (Verlag Chemie, Weinheim, 1980).Google Scholar
3. Paleos, C. M., in Polymerization in Organized Media, edited by Paleos, C. M. (Gordon and Breach Science Publishers, Philadelphia, 1992) p. 183.Google Scholar
4. Kroschwitz, J., Mark, H., Overberger, C., Bikules, N., Menges, G., in Encyclopedia of Polymer Science and Engineering, edited by Kroschwitz, J., Mark, H., Overberger, C., Bikules, N., Menges, G. (J. Wiley & Sons, New York, 1985) Vol. 1A.Google Scholar
5. Rubingh, D. N. and Holland, P. M. in Cationic Sufactants: Physical Chemistry, edited by Rubingh, D. N. and Holland, P. M. (Marcel Dekker, New York, 1991) Vol. 37.Google Scholar
6. Lester, C. L., Colson, C. D., Guymon, C. A., Macromolecules 34, 4430 (2001).Google Scholar
7. Guymon, C. A. and Bowman, C. N., Macromolecules 30, 5271 (1997).Google Scholar