Hostname: page-component-6bf8c574d5-b4m5d Total loading time: 0 Render date: 2025-02-22T16:17:56.806Z Has data issue: false hasContentIssue false
  • English
  • Français

Plasma Synthesis of Fine Ceramic Powders by a Novel Counter-Flow Liquid Injection Method.

Published online by Cambridge University Press:  28 February 2011

P. Kong ,
T.W. Or ,
L. Stachowicz  and
E. Pfender
P. Kong
Affiliation:
Center for Plasma-Aided Manufacturing, Dept. of Mech. Eng., University of Minnesota, Minneapolis, MN 55455, USA.
T.W. Or
Affiliation:
Center for Plasma-Aided Manufacturing, Dept. of Mech. Eng., University of Minnesota, Minneapolis, MN 55455, USA.
L. Stachowicz
Affiliation:
Center for Plasma-Aided Manufacturing, Dept. of Mech. Eng., University of Minnesota, Minneapolis, MN 55455, USA.
E. Pfender
Affiliation:
Center for Plasma-Aided Manufacturing, Dept. of Mech. Eng., University of Minnesota, Minneapolis, MN 55455, USA.
Get access

Abstract

Ceramic powders of carbides, oxides, solid solutions of oxides, magnetic and non-magnetic spinels, superconductors and composites have been successfully synthesized in a thermal plasma jet reactor using a novel counter-flow liquid injection plasma synthesis (CF LIPS) method developed to overcome the problems associated with solid injection and to realize the benefits of gas phase reactions and counter-flow injection. Standard material characterization techniques have been used for powder analysis.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 180: Symposium A – Better Ceramics Through Chemistry IV , 1990 , 849
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Lau, Y., Kong, P. C. and Pfender, E., Proc., ISPC8, Vol. 1, p. 101 (1987), Tokyo, Japan.Google Scholar
2. Lau, Y., Kong, P. C. and Pfender, E., Ceramic Transactions, Vol. 1, Part A, p. 298 (1988).Google Scholar
3. Kong, P. C. and Pfender, E., Proc. of the 2nd Int. Conf. on Cerm. Powder Processing Sci. Oct. 12–14, 1988 Berchtesgaden, FRG (in press).Google Scholar
4. Kong, P. C. and Pfender, E., Proc. of Int. Sym. on Combustion and Plasma Synthesis of High Temp. Materials, San Francisco, Oct. 26–28, 1988 (in press).Google Scholar
5. Kong, P. C., Invited Lecture, 9th Int. Sym. on Plasma Chemistry, Pugnochiuso, ITALY, p. XI, Sept 1989, and J. of Pure & Applied Chem. 1990 (in press).Google Scholar
6. Paik, S. H., Chen, Xi, Kong, P. and Pfender, E., Submitted to J. Plasma Chem. and Plasma Processing, (1990).Google Scholar